Manualshelf

Installation Guide

ManualsBrandsRohl ManualsHome EssentialsLux Matte Black Stainless Steel C-Spout Filter Faucet
12345678910
Installation Instructions
Note: Fits a maximum bench thickness of 2 1/2inches.
Cut-out size minimum 1/2”, maximum 1 1/2”.
1. Flush pipe work to ensure it is free from debris.
2. Cut a mounting hole as per cut-out above in the desired position for the faucet.
3. Remove mounting nut #4.5, steel washer #4.4 and rubber washer #4.3 from filter tap.
4. Position in bench top ensuring the base seal #3 is in place.
5. From underneath the bench install the rubber washer #4.3, steel washer #4.4 and .
mounting nut #4.5 .
6. Connect to cold water supply (See installations for water filter systems - Not included).
a. 1/4” compression fitting is required. (Not included.)
7. Turn on water supply and check for leaks.
CAR
E & MAINTENANCE: Refer Rohl care & maintenance guide.
WARRANTY: Warranty is limited lifetime. See ROHL website for details. (www.rohlhome.com).
ROHL LLC 3 Parker, Irvine, CA 92618
714-557-1933 www.rohlhome.com
CARE & MAINTENANCE: Refer Rohl care & maintenance guide.
WARRANTY: Warranty is limited lifetime. See ROHL website for details. (www.rohlhome.com).
Installation Instructions
Note: Fits a maximum bench thickness of 2 1/2inches.
Cut-out size minimum 1/2”, maximum 1 1/2”.
1. Flush pipe work to ensure it is free from debris.
2. Cut a mounting hole as per cut-out above in the desired position for the faucet.
3. Remove mounting nut #4.5, steel washer #4.4 and rubber washer #4.3 from filter tap.
4. Position in bench top ensuring the base seal #3 is in place.
5. From underneath the bench install the rubber washer #4.3, steel washer #4.4 and .
mounting nut #4.5 .
6. Connect to cold water supply (See installations for water filter systems - Not included).
a. 1/4” compression fitting is required. (Not included.)
7. Turn on water supply and check for leaks.

Summary of content (11 pages)