Specification Sheet

ManualsBrandsRohl ManualsShower ComponentsRohl Matheson Wall Mounted Tub Spout

MATHESON™ 8” WALL MOUNT TUB SPOUT

ML2017

FEATURES

• 3/4” female NPT inlet

• 8” reach

• Brass construction

• If 1/2” required, you may purchase a

3/4” x 1/2” nipple at any hardware store

COLORS/FINISHES

• Polished Chrome

• Polished Nickel

• Satin Nickel

WARRANTY

• Limited Lifetime

2 3/8"

8 5/8"

3/4" NPT

2 3/8"

Transitional Matheson™

www.ferguson.com

Consult your local FERGUSON showroom for additional information and speciﬁcations. www.ferguson.com.

Summary of content (4 pages)

PAGE 1
www.ferguson.com MATHESON™ 8” WALL MOUNT TUB SPOUT Transitional Matheson™ ML2017 COLORS/FINISHES WARRANTY • 3/4” female NPT inlet • 8” reach • Brass construction • If 1/2” required, you may purchase a 3/4” x 1/2” nipple at any hardware store • Polished Chrome • Polished Nickel • Satin Nickel • Limited Lifetime 2 3/8" FEATURES 3/4" NPT 8" 8 5/8" 2 3/8" Consult your local FERGUSON showroom for additional information and specifications. www.ferguson.com.
PAGE 2
grub screw does s in place. d then dry with a oth and warm r scouring agent urface of the faucet. Fantastik. www.ferguson.com SPARE PARTS 3/4 in Female Installation Instructions 1. 2. 3. 4. 5. Remove mounting nut #2. a. loosen off grub screw #5 until nearly out to ensure the grub screw does not cut the o-rings on the mounting nut. Apply grease to o-rings on mounting nut. (Not supplied.) Install mounting nut #2 to supply line and ensure the o-ring seal #1 is in place.
PAGE 3
www.ferguson.com INSTALLATION INSTRUCTIONS ROHL MATHESON WALL MOUNTED TUB SPOUT ML2017APC, ML2017PN, ML2017STN INSTALLATION INSTRUCTIONS Please leave instructions with the home owner once installed. Consult your local FERGUSON showroom for additional information and specifications. www.ferguson.com.
PAGE 4
grub screw does s in place. d then dry with a oth and warm r scouring agent urface of the faucet. Fantastik. ot be covered by ww.rohlhome.com) om entering the e street www.ferguson.com INSTALLATION INSTRUCTIONS 3/4 in Female Installation Instructions 1. 2. 3. 4. 5. Remove mounting nut #2. a. loosen off grub screw #5 until nearly out to ensure the grub screw does not cut the o-rings on the mounting nut. Apply grease to o-rings on mounting nut. (Not supplied.