Specification Sheet

MATHESON™ PRESSURE BALANCE BATH OR SHOWER TRIM

WITH INTEGRATED VOLUME CONTROL WITHOUT DIVERTER

ML2013LM

FEATURES

• Lever metal handle

• Pressure balanced concealed bath or shower

mixer trim for R2012D rough valve with volume

and temperature control

• Components made of solid brass

• Complete with plate, escutcheon and handle

• Rotate handle clockwise for hot and

counterclockwisefor cold

• Move handle up for on, down for off

To complete package order R2012D rough valve

COLORS/FINISHES

• Polished Chrome

• Polished Nickel

• Satin Nickel

WARRANTY

• Limited Lifetime

6 11/16"

5 29/32"

Transitional Matheson™

www.ferguson.com

Consult your local FERGUSON showroom for additional information and speciﬁcations. www.ferguson.com.

PAGE 1
www.ferguson.
PAGE 2
www.ferguson.com INSTALLATION INSTRUCTIONS Installation In 1. Remove Mud cov Please note: #5 fa package. 3/8” extension kit 2. Remove trim parts 3. Install the cartrid shown. Installing Faceplate and 1. Install the facepla 2. Slide the cover sle PBV, using the co a. App b. Note finis 3. Slide the nut trim Installing lever: 1. Position the brass Note: Escutcheon 2. Install the interfac 3.
PAGE 3
www.ferguson.com INSTALLATION INSTRUCTIONS ROHL MATHESON PBV SHOWER TRIM SET ML2013LMAPC, ML2013LMPN, ML2013LMSTN For Pressure Balance Without Diverter Rough Valve R2012D INSTALLATION INSTRUCTIONS Please leave instructions with the home owner once installed. e, CA 92688 ome.com #41910 01/14 Consult your local FERGUSON showroom for additional information and specifications. www.ferguson.com.
PAGE 4
www.ferguson.com INSTALLATION INSTRUCTIONS Installation Instructions 1. Remove Mud cover (not shown) and the #5 faceplate nut on the rough valve. Please note: #5 faceplate nut (R945440) is included with the rough, not the trim package. 3/8” extension kit available; order R945440/2. 2. Remove trim parts #13 through #8 and cartridge interface #2. 3. Install the cartridge interface #2 on cartridge stem and tighten grub screw #3, as shown. Installing Faceplate and Cover Sleeve: 1.