Specification Sheet

ManualsBrandsRohl ManualsPlumbingMatheson Deck Mounted Roman Tub Filler with Built-In Diverter - Includes Hand Shower

MATHESON™ 4-HOLE DECK MOUNT TUB FILLER WITH

HANDSHOWER

ML2011LM

FEATURES

• Solid brass construction

• Metal lever handles

• Single-function handshower with easy cleaning

face

• 8 1/8” spout reach

• 5 3/32” spout height

• 1/4-turn ceramic valves; self-cleaning,

self-lubricating, quiet operation

• Self leveling mounting hardware

• Flow rate: 15 to 16 GPM at 45 PSI

• Cutouts: 3 x 1 1/4”, spout 2”

• 3/4” NPT connectors

COLORS/FINISHES

• Polished Chrome

• Polished Nickel

• Satin Nickel

WARRANTY

• Limited Lifetime

1 13/16" MAX.

2 1/8"

3 9/32"

1 1/4"

3/4" NPT

1 1/4"

2" MAX.

7 29/32"

8 1/16"

3 13/32"

5 3/32"

COLD

3/4" NPT

HOT

Transitional Matheson™

www.ferguson.com

Consult your local FERGUSON showroom for additional information and speciﬁcations. www.ferguson.com.

Summary of content (5 pages)

PAGE 1
www.ferguson.
PAGE 2
www.ferguson.com SPARE PARTS Installation Inst Flush out all pipework to rem The hot supply should be fitt Installing Hot & Cold Side V 1. Remove trim parts #1 a. Remove side valv 2. Install the side valve # a. From the top of th side valve and en b. Install the escutc i. Note: Es escutche ii. Set escu c. Install the locking d. Position the lever Installation note: For servicing after installation, install a service door near the valves. Installing the Spout: (1 5/1 1. Remove diverter parts 2.
PAGE 3
www.ferguson.com INSTALLATION INSTRUCTIONS clips on weight. Check travel ROHL MATHESON 4 HOLE TUB FAUCET WITH HANDSET ML2011LMAPC, ML2011LMPN, ML2011LMSTN INSTALLATION INSTRUCTIONS gaged. nd spray. set with no pressure. s running. This action may th. y water and then dry with a h a soft cloth and warm sive acid or scouring agent mage the surface of the faucet. ex, 409 or Fantastik. face will not be covered by details. (www.rohlhome.com).
PAGE 4
www.ferguson.com INSTALLATION INSTRUCTIONS Installation Instructions Flush out all pipework to remove any foreign material. The hot supply should be fitted on the left when viewed from the front. Installing Hot & Cold Side Valves and Trim: (2 x 1 5/16” cut-outs) 1. Remove trim parts #1 through #4. a. Remove side valve escutcheon #6. 2. Install the side valve #11 from below the deck with the outlets facing outwards. a.
PAGE 5
www.ferguson.com INSTALLATION INSTRUCTIONS 6. Connect handset to hose ensuring washer #39 is in place. 7. Install the counter weight #27 to hose #35 and secure with clips on weight. Check travel and movement and reposition counter weight if necessary. ROHL MA ML2011 IN After Installation: 1. Test each side valve for leaks at each connection. 2. Test the faucet operation for leaks with the water running. 3. Access below the deck is required for handset hose. Note: An access panel is recommended.