www.rohlhome.com MEDA TRIM FOR 1/2” THERMOSTATIC/DIVERTER CONTROL ROUGH VALVE Modern Bath Meda LV390L (Metal Levers) FEATURES COLORS/FINISHES WARRANTY • Trimplate, diverter control, temperature control • Brass construction • Must order R1050BD rough valve to complete • Includes ROHL logo on trim plate • Polished Chrome • Polished Nickel • Satin Nickel • Limited Lifetime Warranty 8 1/2” 4 1/2” 4” H 1/8” C Consult your local ROHL showroom for additional information and specifications.
www.rohlhome.com 9 1/16” MEDA SQUARE RAIN SHOWERHEAD Spa Shower I00597 FEATURES • 2-Year Limited Lifetime 9 1/16” • Polished Chrome • Polished Nickel • Satin Nickel 9 1/16” 1/2" GAS F 2 1/4” • • • • Single-function Rain showerhead 9 1/16” square faceplate Brass construction Flexible calcium resistant nozzles on spray face allow for easy removal of hard water build-up Radius corners 1/2” female inlet with swivel connection Flow rate 1.
www.rohlhome.
www.rohlhome.com ECOMODERN HANDSHOWER Spa Shower Collection SOF136 FEATURES COLORS/FINISHES WARRANTY • 5-function spray patterns: Classic Spray, Concentrated Spray, Mist, Classic/Concentrated, Classic/Mist • Contemporary style • 4” diameter spray face or faceplate • Finger notch for easy rotation between spray functions • Position definition between spray functions is positive 1/2” male connection • Eco and environmentally friendly, restricted to 1.
www.rohlhome.com MODERN SLIDE BAR ROHL Spa Shower 1650 FEATURES COLORS/FINISHES WARRANTY • • • • • Polished Chrome • Polished Nickel • Satin Nickel • Unlacquerred Brass • Matte Black • 2-year Limited Warranty Brass construction 29 5/8” length Sliding handshower parking bracket Length may not be cut down Ø1 1/8" 29 5/8" 24 3/8" 4 3/8" 2 1/2" Ø3/4" Ø1 5/8" 2 1/2" 3 1/4" Consult your local ROHL showroom for additional information and specifications.
www.rohlhome.
www.rohlhome.
www.rohlhome.com 1/2” SHARED THERMOSTATIC SHOWER WITH DIVERTER ROHL Spa Shower R1055BD FEATURES COLORS/FINISHES WARRANTY • Top handle allows dedicated flow to three functions • Up to two shared functions may be actuated at once • Degree of diverter engagement allows flow rate • Rough Only • Limited Lifetime • • • • • 5 3/8” 4 1/2” • • • • • 3 5/8” CUT OUT FOR TILE 3”MAX. x 6 1/2”MAX. • adjustment.
www.rohlhome.com INSTALLATION INSTRUCTIONS 800.777.9762 www.rohlhome.com R1050BD- SINGLE FUNCTION OPERATION 1/2” THERMOSTATIC VALVE R1055BD- SHARED FUNCTION OPERATION 1/2” THERMOSTATIC VALVE INSTALLATION INSTRUCTIONS WE RECOMMEND THAT ALL PLUMBING PRODUCTS BE INSTALLED BY A LICENSED PROFESSIONAL IMPORTANT: Thoroughly read instructions before installation. 53" 8 136.29 41" 2 114.3 73" 4 196.21 35" 8 93.3 33" 8 85.73 Consult your local ROHL showroom for additional information and specifications.
www.rohlhome.com INSTALLATION INSTRUCTIONS The valve is designed with two outlets for ease of installation, but are not intended to be used concurrently with each other. Using both outlets will reduce the performance of the valve. MAINTENANCE (continued) WARNING: IF THIS VALVE IS INSTALLED UPSIDE-DOWN A REVERSE CARTRIDGE IS NOT AVAILABLE. CONSEQUENTLY, VALVE MUST BE REMOVED AND REINSTALLED RIGHT-SIDE UP. Remove check valve with a 5/8” (16mm) socket wrench from the body.
www.rohlhome.com INSTALLATION INSTRUCTIONS MAINTENANCE ROUGH IN VALVE TO FRAME THERMOSTATIC CARTRIDGE Carefully remove the trim and plate and place in a safe location for the time being. Once the desired location has been determined, install a cross support beam to wall studs. Use a flat head screwdriver to shut off the water supply to the cartridge by turning the temporary shutoff screws clockwise until screw stops. Ensure to close both the hot and cold sides of the water supplies.
www.rohlhome.com INSTALLATION INSTRUCTIONS ROUGH IN DIMENSIONS (All dimensions shown are to the nearest 1/16”) 5 3/8” FUNCTION The R1055BD valve has two shared positions. The operation is dedicated and only one outlet will operate at a time. There are 5 on positions and 1 off positions. It is suggested the 12 O’clock position be the off position. 4 1/2” CUT OUT FOR TILE 3”MAX. x 6 1/2”MAX.
