Specification Sheet

www.rohlhome.com
ROHL Spa Shower
UNIVERSAL 1/2” THERMOSTATIC ROUGH VALVE WITH INTEGRATED
TWO OUTLET DIVERTER
R1052BD
FEATURES
• Top handle diverts the water two ways
• Degree of diverter engagement allows ow
rate adjustment. CALGreen compliant.
CEC compliant Dedicated Diverter.
• Service stops included
• Primary screens at the cartridge
• Temperature control with integrated two
outlet diverter; factory setting at 100ºF
• Cast brass construction
• Bottom outlet for tub ller only. A separate ow
control valve and/or trim required for this
application.
• Back of valve to nished wall 3 1/2” min.,
5 1/4” max.
• Flow rate 6.7 GPM at 60 PSI
• 1/2” male inlets, 2 x 1/2” male outlets
• Complete with mud guard for
installation
• If PEX is utilized, oversize the supply
line to 3/4” for full ow capacity
• Bottom control sets temperature
• Extension kit included, may be cut to
length required
• Must order trim to complete
COLOR/FINISH
• Rough only
Consult your local ROHL showroom for additional information and specications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
WARRANTY
• Limited Lifetime
• Turn counterclockwise for HOT
• Turn clockwise for COLD
The R1052BD valve is Calgreen compatible
The operation is dedicated and only one outlet will operate at
a time.
There are 2 on positions and 1 off positions.
It is suggested the 12 O’clock position be the off position.
Installer will need to set:
• The on positions will then be 9:00 and 3:00
• The off positions will be 12:00
7 3/4”
4 1/2”
3 5/8”
5 3/8”
3 3/8”
3 1/2” MIN.
5 1/4” MAX.
CUT OUT FOR TILE
3”MAX. x 6 1/2”MAX.
120º
100º
80º
OFF
(12:00)
(3:00)(9:00)
Upper Port Right Port
ON
ON
H C