Specification Sheet

ManualsBrandsRohl ManualsPlumbingCampo Thermostatic Shower System with Shower Head, Hand Shower, Slide Bar, Shower Arm, Hose, and Valve Trim

www.rohlhome.com

ROHL — Italian Bath Campo

COLORS/FINISHES WARRANTY

Consult your local ROHL showroom for additional information and specications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.

FEATURES

• Trimplate, diverter control, temperature control

• Brass construction

• Must order R1050BD rough valve to complete

• Includes ROHL logo on trim plate

IL option

CAMPO 1/2” THERMOSTATIC/DIVERTER CONTROL TRIM

A4464IW (Industrial Metal Wheels)

A4464IL (Industrial Metal Levers)

OFF

4 1/2”

8 1/2”

4”

1/8”

• Limited Lifetime

* 5-year Limited Warranty on Matte Black

**No Warranty on Tuscan Brass and

Satin Unlacquered Brass

• Polished Chrome

• Polished Nickel

• Satin Nickel

• Matte Black*

• Tuscan Brass**

• Satin Unlacquered Brass**

Summary of content (12 pages)

PAGE 1
www.rohlhome.
PAGE 2
www.rohlhome.com 8” ELIOS RAIN SHOWERHEAD ROHL Spa Shower WI0196 FEATURES COLORS/FINISHES WARRANTY • Single-function Rain showerhead • ABS construction • Flexible calcium resistant nozzles on spray face allow for easy removal of hard water build-up • ½” female inlet with swivel connection • Flow rate 1.
PAGE 3
www.rohlhome.
PAGE 4
www.rohlhome.com Ocean4 Four-Function Handshower ROHL Shower Collection B00102 FEATURES • 4-function spray patterns — Classic Spray — Cascade — Massage — Champagne • 1/2" male connection • Flows at 1.8 GPM • Anti-calcium components COLORS/FINISHES • Polished Chrome • Polished Nickel • Satin Nickel • Tuscan Brass WARRANTY • Two years on manufacturer defects* *No warranty on Tuscan Brass finish Consult your local ROHL showroom for additional information and specifications.
PAGE 5
www.rohlhome.com CAMPO SLIDE BAR ROHL Spa Shower A8074IW (Metal Campo Wheel) FEATURES COLORS/FINISHES WARRANTY • Brass construction • Campo style • 21 3/8” length • 45/64” diameter bar • Sliding handshower parking bracket • 3 3/16” projection • Length may be cut down • Polished Chrome • Polished Nickel • Satin Nickel • Tuscan Brass • Limited Lifetime Warranty 21 3/8” Ø2 5/64” 3 3/16” 45/64” Consult your local ROHL showroom for additional information and specifications.
PAGE 6
www.rohlhome.
PAGE 7
www.rohlhome.
PAGE 8
www.rohlhome.com 1/2” SHARED THERMOSTATIC SHOWER WITH DIVERTER ROHL Spa Shower R1055BD FEATURES COLORS/FINISHES WARRANTY • Top handle allows dedicated flow to three functions • Up to two shared functions may be actuated at once • Degree of diverter engagement allows flow rate • Rough Only • Limited Lifetime • • • • • 5 3/8” 4 1/2” • • • • • 3 5/8” CUT OUT FOR TILE 3”MAX. x 6 1/2”MAX. • adjustment.
PAGE 9
www.rohlhome.com INSTALLATION INSTRUCTIONS 800.777.9762 www.rohlhome.com R1050BD- SINGLE FUNCTION OPERATION 1/2” THERMOSTATIC VALVE R1055BD- SHARED FUNCTION OPERATION 1/2” THERMOSTATIC VALVE INSTALLATION INSTRUCTIONS WE RECOMMEND THAT ALL PLUMBING PRODUCTS BE INSTALLED BY A LICENSED PROFESSIONAL IMPORTANT: Thoroughly read instructions before installation. 53" 8 136.29 41" 2 114.3 73" 4 196.21 35" 8 93.3 33" 8 85.73 Consult your local ROHL showroom for additional information and specifications.
PAGE 10
www.rohlhome.com INSTALLATION INSTRUCTIONS The valve is designed with two outlets for ease of installation, but are not intended to be used concurrently with each other. Using both outlets will reduce the performance of the valve. MAINTENANCE (continued) WARNING: IF THIS VALVE IS INSTALLED UPSIDE-DOWN A REVERSE CARTRIDGE IS NOT AVAILABLE. CONSEQUENTLY, VALVE MUST BE REMOVED AND REINSTALLED RIGHT-SIDE UP. Remove check valve with a 5/8” (16mm) socket wrench from the body.
PAGE 11
www.rohlhome.com INSTALLATION INSTRUCTIONS MAINTENANCE ROUGH IN VALVE TO FRAME THERMOSTATIC CARTRIDGE Carefully remove the trim and plate and place in a safe location for the time being. Once the desired location has been determined, install a cross support beam to wall studs. Use a flat head screwdriver to shut off the water supply to the cartridge by turning the temporary shutoff screws clockwise until screw stops. Ensure to close both the hot and cold sides of the water supplies.
PAGE 12
www.rohlhome.com INSTALLATION INSTRUCTIONS ROUGH IN DIMENSIONS (All dimensions shown are to the nearest 1/16”) 5 3/8” FUNCTION The R1055BD valve has two shared positions. The operation is dedicated and only one outlet will operate at a time. There are 5 on positions and 1 off positions. It is suggested the 12 O’clock position be the off position. 4 1/2” CUT OUT FOR TILE 3”MAX. x 6 1/2”MAX.