Installation Sheet

DOUBLE ROBE HOOK
TOILET PAPER HOLDER
HAND TOWEL HOLDER
ACCESSORY
Robe Hook, Toilet Paper Holder and Hand Towel
Holder Installation Instructions
1. Mark out required positions for the 2 steel mounting pillars #2.
a. Note: The steel mounting pillars must be level.
2. Install the steel mounting pillars #2 to wall using the self tapping screws #3.
a. Anchor sleeves #1 are provided for masonry walls.
b. Drill pilot holes, if required.
3. Install the accessory and tighten the grub screws #6, as shown.
24 INCH TOWEL BAR
24 Inch Towel Bar Installation Instructions
1. Mark out required positions for the 2 steel mounting pillars #2 at 24 inch centres.
a. Note: The steel mounting pillars must be level.
2. Install the 2 steel mounting plates #2 to wall using the self tapping screws #3.
a. Anchor sleeves #1 are provided for masonry walls.
b. Drill pilot holes if required.
3. Install the towel bar and tighten the grub screws #5 as shown.