Specification Sheet

www.rohlhome.com
ROHL Spa Shower
COLORS/FINISHES WARRANTY
• Limited Lifetime
Consult your local ROHL showroom for additional information and specications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
FEATURES
• Top handle allows dedicated ow to three functions
• Up to two shared functions may be actuated at once
• Degree of diverter engagement allows ow rate
adjustment.
• Cast Brass construction
• Service stops included
• Primary screens at the cartridge
• Temperature control with integrated three outlet
diverter; factory setting at 100ºF
• Bottom outlet for tub ller only. A separate ow control
valve and/or trim required for this application.
• Back of valve to nished wall 3 1/2” min., 5 1/4” max.
• Flow rate 6.7 GPM at 60 PSI
• 1/2” male inlets, 3 x 1/2” male outlets
• Complete with mud guard for installation
• If PEX is utilized, oversize the supply line to 3/4” for full
ow capacity
• If only two outlets are being utilized, cap is included to
close ”dead” outlet
• Bottom control sets temperature
• Extension kits included, may be cut to length if
required.
• Must order trim to complete
• California Non-Compliant
• Rough Only
1/2” SHARED THERMOSTATIC SHOWER WITH DIVERTER
R1055BD
7 3/4”
4 1/2”
3 5/8”
5 3/8”
3 3/8”
3 1/2” MIN.
5 1/4” MAX.
CUT OUT FOR TILE
3”MAX. x 6 1/2”MAX.
120º
100º
80º
OFF
(12:00)
(1:30)
(3:30)
(6:00)
(8:30)
(10:30)
ON
ON
1
ON
1-2
ON
2-3
3
2
ON
H C
• Turn counterclockwise for HOT
• Turn clockwise for COLD
The R1055BD valve has two shared positions.
The operation is dedicated and only one outlet will
operate at a time.
There are 5 on positions and 1 off positions.
It is suggested the 12 O’clock position be the off position.
Installer will need to set:
• The on positions will then be 10:30, 8:30, 6:00, 3:30 and 1:30
• The off positions will be 12:00