www.rohlhome.
www.rohlhome.com A1676LP & A1676LM Spare Parts 2QTEGNCKP C7669M .GXGT (Metal lever) C7699/1 C7075-2 % Ä counterclockwise EQWPVGT ENQEMYKUG spout ring set 52176 4+0) 5'6 % 5'6 C7593SET C7678P (Porcelain 2QTEGNCKP .GXGT lever) C7075-2 % 4 counterclockwise EQWPVGT ENQEMYKUG C7232/2 % C7075-1 % Ä ENQEMYKUG clockwise # %4 A5556CR A5556CR # %4 Consult your local ROHL showroom for additional information and specifications.
www.rohlhome.com A1676LPWS & A1676LMWS Spare Parts C7669M (Metal lever) C7699/1 C7075-2 counterclockwise C7678P (Porcelain lever) C7108 spout ring set C7593SET C7698P C7232/2 C7075-1 clockwise A5556CR A5556CR Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions INSTALLATION FOR SINGLE HOLE/TWO LEVER FAUCETS with two lever or cross handle design (MODELS INCLUDE: A1467, A1466, A1470, A1469 or A1680,A1679, A1667, A1676) Model A1676 shown 1. Install the supply hoses into the body. ° Note: hand tighten only, do not over tighten. Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions INSTALLATION 2. Install mounting stud securely or verify it is installed 3. Insert faucet into mounting hole Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions INSTALLATION 4. Under the sink, stack the half ring rubber gasket - 6, the half ring mounting plate - 7, then the mounting nut - 8 onto the stud. 8 5. Check the position on the sink of the faucet, then tighten the nut with a 13mm wrench. ° Note: the under deck mounting surface must be flat. If irregular, the nut may not be secured, and the faucet will be loose on the sink. 6. Connect the supply lines to the hot and cold supplies. 7.
www.rohlhome.com Installation Instructions MAINTENANCE FOR SINGLE HOLE/TWO LEVER FAUCETS with two lever or cross handle design HOW TO CHANGE THE HOT OR COLD CARTRIDGE (MODELS INCLUDE: A1467, A1466, A1470, A1469 or A1680,A1679, A1667, A1676) (model A1469 and A1676 shown) 1.Turn off the hot and cold supply lines to the faucet. (Not shown) 2. Remove the handle and dome. 3.
www.rohlhome.com Installation Instructions MAINTENANCE 4. 4. Install new cartridge 5. Turn on supply lines and test for leaks. Not shown. 6. Install lever and dome 5.-6. Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions INSTALLATION OF SINGLE HOLE FAUCET WITH SIDESPRAY MODELS INCLUDE: DUAL LEVER MODELS: A1679WS, A1676WS SINGLE TOP LEVER MODELS: A3606WS, A3608, A3479 SINGLE LEVER SIDE LEVER MODELS: A3650WS Model A3608WS shown Install the supply hoses into the body - Note: hand tighten only, do not over tighten. Install mounting stud securely or verify it is installed. Consult your local ROHL showroom for additional information and specifications.
www.rohlhome.com Installation Instructions Insert faucet into mounting hole. Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions Under the sink, stack the half ring rubber gasket - 6, the half ring mouting plate - 7, then the mounting nut -9 onto the stud. Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions Check the position on the sink of the faucet, then tighten the nut with a 13mm wrench. Note: the under deck mounting surface must be flat. If the mounting surface is irregular, the nut may not be secured, and the faucet will be loose on the sink. Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions • Insert the hand spray escutcheon into the sink hole Please note: make sure the hand spray hole is a minimum of 4 3/4” away from the main body of the faucet. • Install the rubber washer -13, the flat metal washer -14, then the nut -15. Secure on the deck, but do not over tighten. 43 /4” Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions • Install the black hand spray hose to the supply from the faucet under the sink. - Guide the 9mm male end up through the escutcheon. - Install the hand spray with the required flat washer with screen on top of the sink. • Connect the supply lines to the hot and cold supplies securely. - Please note: make sure the rubber washers with the screens are used. These screens will prevent debris from entering the diverter. •Turn on the water for the hot and cold.
www.rohlhome.com Installation Instructions Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions Spare Parts THE O-RING MUST BE ALWAYS PALACED BETWEEN THE HANDSPRAY AND HOSE VALVES RING Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions LOW FLOW OR NO FLOW TROUBLESHOOTING INSTRUCTIONS (ALL MODELS: A3608 shown) Current kitchen faucets have a flow rate of 1.5 GPM from the aerator and the hand spray. If you are experiencing low flow from the spout: Do not change the cartridge • • • • Unscrew and clean the aerator 1 Unscrew and clean the filters inside the supply connections. 3 Check the supply lines for kinks or obstructions. 3 Make sure the supply line stops are fully on.
www.rohlhome.com Installation Instructions Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
