Specification Sheet

3
www.rohlhome.com
Installation Instructions
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
I
because it is not possible to remove the shank from the spout)
( you have to install the spout and the shank together
This spout has not the easy quick connection system
- Introduce the spout body (D) in the hole of the deck and fix it, placing the rubber washer (E),
- Fix the shank (R) placing, before the washer and then the metal nut with disk.
The hot supply should be on the left when viewed from the front of the fitting.
C O L D
N
Q
Ø 1 1 7 / 6 4 "
1 3 7 / 6 4 "
M A X
Ø1 1 / 3 2 "
M A X
2 1 / 8 "
L = 2 3 5 / 8 "
H O T
L = 3 9 3 / 8 "
3 / 4 " N P T
I
R
C
E
L
H
L
B
R
A
b - Assembly
between the base of the shank and the deck.
Flush out the pipework to remove any foreign matter.
a - Preparation
A T T E N T I O N
INSTALLATION MUST COMPLY WITH LOCAL PLUMBING CODES
- Disassemble the nut (A), the two holes cross (B) and the fixing kit (C).
V
U
T
S
 1 3 / 8 "
M A X
1 3 1 / 3 2 "
L = 7 8 4 7 / 6 4 "
M
6 1 7 / 6 4 "
2 2 1 / 6 4 "
2 2 1 / 6 4 "
5 1 / 3 2 "
8 7 / 6 4 "
F
D
Art. A1004LV--
G
Bath mixer on edge type with 4 holes
2 2 1 / 6 4 "
9 6 1 / 6 4 "
2 2 1 / 6 4 "
O
P