Brochure

14
The right probe
for the best
measurement
Probe type Ideal for measuring Recommended probes
Standard passive probe Single-ended voltages, max. bandwidth of 500MHz R&S®RT-ZP05S comes as standard with the
R&S®RTM3000
Active broadband probe Singled-ended voltages, up to 8GHz bandwidth R&S®RT-ZS10E, R&S®RT-ZS10, R&S®RT-ZS20
Power integrity probe Disturbances on power rails with high offsets, greater than
2GHz bandwidth
R&S®RT-ZPR20
High voltage probe High single-ended and differential voltages, up to 6kV R&S®RT-ZHD007, R&S®RT-ZHD15, R&S®RT-ZHD16,
R&S®RT-ZHD60
Current probe Currents from µAs to kAs R&S®RT-ZC05B, R&S®RT-ZC10B, R&S®RT-ZC15B,
R&S®RT-ZC20B, R&S®RT-ZC30
EMC near-field probe EMI debugging up to 3GHz R&S®HZ-15
can assign it different functions, such as run/stop, autoset
and adjust offset.
R&S®ProbeMeter: integrated voltmeter for precise
DC measurements
One connection lets you see the scope waveform and
gives you access to a highly accurate voltmeter that shows
the DC value regardless of other instrument settings.
▷ For more information, see the product brochure:
Probes and accessories, Rohde & Schwarz digital
oscilloscopes (PD 3606.8866.12).
More than 30: dedicated probes
Micro button: for convenient
instrument control
0.01 % accuracy: with
R&S®ProbeMeter
Practical design: micro button for convenient instrument control. Diverse
probe tips and ground cables are included as standard accessories.
Extensive probe range for all measurement tasks
A complete portfolio of high-quality passive and active
probes covers all measurement tasks. With an input im-
pedance of 1MΩ, the active probes put only a minimum
load on a signal source’s operating point. The very large
dynamic range, even at high frequencies, prevents signal
distortion – for example: 60V (V
pp
) at 1GHz for the active
single-ended probes.
Complete portfolio for power measurements
The portfolio of dedicated probes for power measure-
ments includes active and passive probes for the different
voltage and current ranges – from μA to kA and from μV
to kV. Dedicated power rail probes detect even small and
sporadic distortions on DC power rails.
Micro button for convenient instrument control
The situation is all too familiar. You've carefully positioned
the probe on the device under test and want to start mea-
surements – but you don't have a free hand. The micro
button on Rohde & Schwarz active probes solves this prob-
lem. It is conveniently situated on the probe tip, and you
RTM3000_bro_en_5214-9144-12_v0300.indd 14 30.11.2017 13:37:36