Datasheet

Version 04.00, December 2018
4 Rohde & Schwarz R&S
®
Cable Rider ZPH Cable and Antenna Analyzer
Specifications
Frequency
Frequency range
R&S
®
Cable Rider ZPH
2 MHz to 3 GHz
with R&S
®
ZPH-B4 option installed
2 MHz to 4 GHz
Frequency resolution
1 Hz
Reference frequency, internal
Total reference accuracy
±(time since last adjustment × aging rate)
+ temperature drift + calibration accuracy
Aging per year
±1 × 10
–6
Temperature drift
0 °C to +30 °C
±1 × 10
–6
+30 °C to +50 °C
±3 × 10
–6
Achievable initial calibration accuracy
±5 × 10
–7
Measurements
Individual
reflection (S
11
)
1-port cable loss
distance-to-fault
model .12
transmission (S
21
)
Measurement wizard
Guides the user through a sequence of individual measurements. Uses the R&S
®
Instrument View PC software to configure the
measurement sequence including hints displayed on the screen. R&S
®
Instrument View is also used to combine the measurement
results into user-configurable reports.
Measurement setup
Port output power
model .02
–10 dBm (nom.)
model .12
–3 dBm to –30 dBm step 1 dB (nom.)
Data points
selectable
101 to 2501
Measurement bandwidth
reflection measurement (S
11
)
10 kHz
transmission measurement (S
21
)
10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz,
1 MHz
Trace modes
clear/write, average
Reflection measurement S
11
Result formats
magnitude, SWR, magnitude and
distance-to-fault, SWR and distance-to-
fault, smith chart, phase
Magnitude
Range
1/2/3/5/10/20/30/50/100/120/130/150 dB,
linear 100 %
Resolution
0.1 dB
SWR
Range
selectable
1 to 1.1/1.5/2/3/6/11/21/71
Measurement speed
0.3 ms per point
Corrected directivity with R&S
®
ZN-Z103
2 MHz ≤ f ≤ 4 GHz
> 42 dB (nom.)
Corrected test port match
with R&S
®
ZN-Z103
2 MHz ≤ f ≤ 4 GHz
> 36 dB (nom.)
Measurement uncertainty
with R&S
®
ZN-Z103
see figure Uncertainty of reflection
measurement
1-port cable loss measurement
Result format
magnitude
Range
selectable
1/2/5/10/20/50/100 dB
Resolution
0.1 dB