Datasheet

Version 04.00, December 2018
14 Rohde & Schwarz R&S
®
Cable Rider ZPH Cable and Antenna Analyzer
Designation
Type
Order No.
Converter cable
R&S
®
TSEMF-CV
1158.9250.02
RF cable (length: 1 m), DC to 6 GHz, N male/N male connectors
R&S
®
HA-Z901
3626.2757.02
Carrying bag, for R&S
®
HA-Z900 or R&S
®
HA-Z1900 Yagi antenna
R&S
®
HA-Z902
1328.6883.02
Compact probe set for E and H near-field measurements, 30 MHz to 3 GHz
R&S
®
HZ-15
1147.2736.02
Near-field probe set H field
R&S
®
HZ-17
1339.4141.02
Preamplifier (3 GHz, 20 dB), power adapter (100 V to 230 V),
for R&S
®
HZ-15
R&S
®
HZ-16
1147.2720.02
RF cable (length: 1 m), DC to 8 GHz, armored,
N male/N female connectors
R&S
®
FSH-Z320
1309.6600.00
RF cable (length: 3 m), DC to 8 GHz, armored,
N male/N female connectors
R&S
®
FSH-Z321
1309.6617.00
Matching pad, 50/75 Ω, L section
R&S
®
RAM
0358.5414.02
Matching pad, 50/75 Ω, series resistor 25 Ω
R&S
®
RAZ
0358.5714.02
Matching pad, 50/75 Ω, L section, N to BNC
R&S
®
FSH-Z38
1300.7740.02
Adapter N (m) – BNC (f)
0118.2812.00
Adapter N (m) – N (m)
0092.6581.00
Adapter N (m) – SMA (f)
4012.5837.00
Adapter N (m) – 7/16 (f)
3530.6646.00
Adapter N (m) – 7/16 (m)
3530.6630.00
Adapter N (m) – FME (f)
4048.9790.00
Adapter BNC (m) – Banana (f)
0017.6742.00
Attenuator, 50 W, 20 dB, 50 Ω, DC to 6 GHz, N (f) – N (m)
R&S
®
RDL50
1035.1700.52
Attenuator, 100 W, 20 dB, 50 Ω, DC to 2 GHz, N (f) – N (m)
R&S
®
RBU100
1073.8495.20
Attenuator, 100 W, 30 dB, 50 Ω, DC to 2 GHz, N (f) – N (m)
R&S
®
RBU100
1073.8495.30
Power sensors supported by the R&S
®
Cable Rider ZPH
6
Designation
Type
Order No.
Directional power sensor, 25 MHz to 1 GHz
R&S
®
FSH-Z14
1120.6001.02
Directional power sensor, 200 MHz to 4 GHz
R&S
®
FSH-Z44
1165.2305.02
Universal power sensor, 10 MHz to 8 GHz, 100 mW, 2-path
R&S
®
NRP-Z211
1417.0409.02
Universal power sensor, 10 MHz to 18 GHz, 100 mW, 2-path
R&S
®
NRP-Z221
1417.0309.02
Wideband power sensor, 50 MHz to 18 GHz, 100 mW
R&S
®
NRP-Z81
1137.9009.02
Wideband power sensor, 50 MHz to 40 GHz, 100 mW (2.92 mm)
R&S
®
NRP-Z85
1411.7501.02
Wideband power sensor, 50 MHz to 40 GHz, 100 mW (2.40 mm)
R&S
®
NRP-Z86
1417.0109.40
Wideband power sensor, 50 MHz to 44 GHz, 100 mW (2.40 mm)
R&S
®
NRP-Z86
1417.0109.44
Three-path diode power sensors, 100 pW to 200 mW, 10 MHz to 8 GHz
R&S
®
NRP8S
1419.0006.02
Three-path diode power sensors, 100 pW to 200 mW, 10 MHz to 18 GHz
R&S
®
NRP18S
1419.0029.02
Three-path diode power sensors, 100 pW to 200 mW, 10 MHz to 33 GHz
R&S
®
NRP33S
1419.0064.02
Three-path diode power sensors, 100 pW to 200 mW, 50 MHz to 40 GHz
R&S
®
NRP40S
1419.0041.02
Three-path diode power sensors, 100 pW to 200 mW, 50 MHz to 50 GHz
R&S
®
NRP50S
1419.0087.02
Thermal power sensor, 300 nW to 100 mW, DC to 18 GHz
R&S
®
NRP18T
1424.6115.02
Thermal power sensor, 300 nW to 100 mW, DC to 33 GHz
R&S
®
NRP33T
1424.6138.02
Thermal power sensor, 300 nW to 100 mW, DC to 40 GHz
R&S
®
NRP40T
1424.6150.02
Thermal power sensor, 300 nW to 100 mW, DC to 50 GHz
R&S
®
NRP50T
1424.6173.02
Thermal power sensor, 300 nW to 100 mW, DC to 67 GHz
R&S
®
NRP67T
1424.6196.02
Thermal power sensor, 300 nW to 100 mW, DC to 110 GHz
R&S
®
NRP110T
1424.6215.02
Average power sensor, 100 pW to 200 mW, 8 kHz to 6 GHz
R&S
®
NRP6A
1424.6796.02
Average power sensor, 100 pW to 200 mW, 8 kHz to 18 GHz
R&S
®
NRP18A
1424.6815.02
R&S
®
NRP-Zxx power sensors require the following adapter cable for operation on the R&S
®
Cable Rider ZPH
USB adapter cable for R&S
®
FSH-Z14/R&S
®
FSH-Z44 power sensors
R&S
®
FSH-Z144
1145.5909.02
USB adapter cable (passive), length: 2 m, to connect R&S
®
NRP-Zxx S/SN
power sensors to the R&S
®
Spectrum Rider FPH
R&S
®
NRP-Z4
1146.8001.02
R&S
®
FSH-Z14 and R&S
®
FSH-Z44 power sensors require the following adapter cable for operation on the
R&S
®
Cable Rider ZPH
USB interface cable, length: 1.5 m, to connect R&S
®
NRP sensors to the
R&S
®
Spectrum Rider FPH
R&S
®
NRP-ZKU
1419.0658.03
6
For average power measurements only.