Brochure

Typical deployment setup with measurement preparation and postprocessing
Central
preparation
Wizard presets
Uniform reporting
Test reports
Evaluations
Wizard-guided test sequence
Site 1 Site 2 Site 3 Site n
●●●
●●●
Rohde & Schwarz R&S®Cable Rider ZPH Cable and Antenna Analyzer 5
Fast measurements – no calibration required
Understanding the need to perform measurements quick-
ly, the R&S®Cable Rider ZPH is factory-precalibrated over
the supported frequency and temperature ranges. The
factory calibration removes the drift error, which can be
a hassle when you have to keep calibrating because the
measured frequency and operating temperature change.
No calibration reminder will pop up on the screen and in-
terrupt measurements. The Rohde & Schwarz calibration
lab performs stringent calibration during production to
minimize measurement errors and provide reliable mea-
surement results. A calibration certificate is included with
the analyzer. When the calibration interval has lapsed,
the analyzer can be sent back to Rohde & Schwarz for
recalibration.
Fast deployment with the wizard function
For fast deployment, all settings and measurement steps
can be preconfigured using the wizard function. The field
technician only needs to execute the test sequences as
shown on the display. The measurement instructions can
be in pictorial form with short descriptions to provide clear
step-by-step guidance for the field technician. The settings
for each test sequence are preconfigured, eliminating the
need to provide special dedicated operational training for
the field technician. Since there is no need to change set-
tings for different measurements, test time is reduced
during installation and maintenance. For the same mea-
surement at multiple sites, simply load the measurement
set to all analyzers – fast deployment thanks to the wizard
function.