Brochure

10
Channel power meter
The R&S®ZPH-K19 channel power meter option converts
the analyzer into a portable power meter with a level mea-
surement accuracy of typically 0.5dB. This option makes
it possible to achieve power measurement results quickly
and easily without needing a power sensor or the spec-
trum analyzer mode. This can help in applications such
as checking power levels along the signal path of a field
transmitter or verifying the power level of a design in the
lab.
Pulse measurements with power sensors
The R&S®ZPH-K29 option enables precise pulse and peak
power measurements using the R&S®ZPH Cable Rider
together with a Rohde & Schwarz wideband power sen-
sor. The wideband power sensors measure pulses
with a resolution of up to 50ns and support frequen-
cies up to 44GHz. This option is useful when the
R&S®Cable RiderZPH is used to install and maintain radar
transmitter systems.
Optional
measurement
modes
R&S®ZPH-K9 power sensor support
R&S®ZPH-K29 pulse measurement
R&S®ZPH-K19 channel power meter
Power measurements with power sensors
Some applications require very high accuracy to
measure and align transmitting power. The R&S®ZPH-K9
option allows the R&S®Cable Rider ZPH to perform
power measurements together with the R&S®NRP-Zxx
power sensor series, with a measurement range of
–67dBm to +45dBm and covering frequencies up to
110GHz.