User manual

VOR/ILS Analyzer EVS200
0796.1800.02 E-8 49
Chapter 3: Operation
∆
∆∆
∆ Level-Mode
Command SR
command function
SR <Set REF> reference level setting
The command SR is for setting the actual receiver level as a reference level in the reference level
window "∆
∆∆
∆ level"-mode.
Example:
command from the controller
response of the VOR/ILS Analyzer EVS200
input:
SR <CR>
sr <CR>
READY <CR/LF>
READY <CR/LF>
Command LR
command function
LR <level reference> reference level query
The command LR reads the actual set reference level in the "∆
∆∆
∆ Level" mode.
Example:
command from the controller
response of the VOR/ILS Analyzer EVS200
query:
LR <CR>
lr <CR>
e.g. -48.1dBm <CR/LF>
e.g. -48.1dBm <CR/LF>
Command LD
command function
LR <level delta>
∆
∆∆
∆-Level query
The command LD reads the actual ∆
∆∆
∆-Level in the "∆
∆∆
∆ Level" mode.
Example:
command from the controller
response of the VOR/ILS Analyzer EVS200
query:
LD <CR>
ld <CR>
e.g. -000.0dBm <CR/LF>
e.g. -000.0dBm <CR/LF>