User manual

VOR/ILS Analyzer EVS200

0796.1800.02 E-8 35

Chapter 3: Operation

Command MI

command function

MI <Mode-ILS> ILS mode setting

The command MI enables the switching over to the "ILS“ mode.

Example:

command from the controller response of the VOR/ILS Analyzer EVS200

input:

MI <CR>

mi <CR>

READY <CR/LF>

Command MB

command function

MB <Mode-BEACON> BEACON mode setting

The command MB enables the switching over to the "BEACON mode“.

Example:

command from the controller response of the VOR/ILS Analyzer EVS200

input:

MB <CR>

mb <CR>

READY <CR/LF>

Mode related control commands

ILS-Mode

Command DD0

command function

DD0 <DDM information> DDM value query

The command DD0 reads the actual DDM value (value without dimension) in the ILS mode.

Example:

command from the controller

response of the VOR/ILS Analyzer EVS200

query:

DD0 <CR>

dd0 <CR>

e.g. 0.2008 <CR/LF>