Datasheet

Version 05.00, December 2017
Rohde & Schwarz R&S
®
RTM Oscilloscope 17
R&S
®
RTM-K1
I
2
C triggering and decoding
Bus configuration
sources for SCL and SDA
R&S
®
RTM3002
channel 1, channel 2, logic channels from
D15 to D0 (requires R&S
®
RTM-B1 option)
R&S
®
RTM3004
channel 1, channel 2, channel 3,
channel 4, logic channels from D15 to D0
(with R&S
®
RTM-B1 option)
bit rate
up to 10 Mbps
size of address
7 bit or 10 bit
size of data
8 bit
label list
associate frame identifier with symbolic ID
Trigger
trigger events
start, stop, restart, missing acknowledge,
address (7 bit or 10 bit), data, address and
data
offset for trigger on data
0 data byte to 4095 data byte
data pattern width
up to 3 sequential data byte
Decode
displayed signals
bus signal, logic signal or both
color coding of bus signal
address, data, start, stop, ACK, NACK,
error
displayed format of address
hex, symbolic ID (label list)
displayed format of data
ASCII, binary, decimal or hex
SPI triggering and decoding
Bus configuration
sources for CS, CLK, MOSI and MISO
R&S
®
RTM3002
channel 1, channel 2, logic channels from
D15 to D0 (requires R&S
®
RTM-B1 option)
R&S
®
RTM3004
channel 1, channel 2, channel 3,
channel 4, logic channels from D15 to D0
(with R&S
®
RTM-B1 option)
bit rate
up to 25 Mbps
chip select (CS)
active low, active high or missing (SSPI)
clock (CLK) slope
rise or fall
data symbol size
1 bit to 32 bit
idle time for SSPI
12.8 ns to 26.8 ms
Trigger
trigger events
start of frame, end of frame, bit number,
data pattern
selectable bit number
0 to 4095
offset for trigger on data pattern
0 to 4095 bit
data pattern size
1 bit to 32 bit
Decode
displayed signals
bus signal, logic signal or both
color coding of bus signal
data, start, stop, error
displayed format of data
ASCII, binary, decimal or hex
data decoding
MSB or LSB first