Datasheet

Version 05.00, December 2017
Rohde & Schwarz R&S
®
RTM Oscilloscope 13
Input and outputs
Front
Channel inputs
BNC, for details see Vertical system
probe interface
auto detection of passive probes,
Rohde & Schwarz active probe interface
External trigger input
BNC, for details see Trigger system
probe interface
auto detection of passive probes
Waveform generator
(requires R&S
®
RTM-B6 option)
BNC, for details see R&S
®
RTM-B6,
waveform generator,
demo lug and GND lug
Probe compensation output
signal shape
rectangle
frequency
1 kHz
voltage
V
low
= 0 V, V
high
= 1.5 V to 3.3 V (meas.)
Pattern source
(requires R&S
®
RTM-B6 option)
P3 to P0
4 lugs, for details see R&S
®
RTM-B6,
4-bit pattern generator
frequency
1 mHz to 25 MHz
voltage
V
low
= 0 V, V
high
= 1.5 V to 3.3 V (meas.)
Ground lug
connected to ground
USB host interface
1 port, type A plug, version 2.0,
flash drives only
Rear
Ethernet interface
1 port, 1 Gbit
AUX OUT (BNC)
trigger out,
for details see Trigger system
reference frequency
10 MHz ±3.5 ppm (meas.)
mask violation
pulse
USB host interface
1 port, type A plug, version 2.0
Fixation loop
for securing the instrument with a cable
Security slot
for standard Kensington style lock
Right side
Digital channel inputs
D15 to D8, D7 to D0
requires R&S
®
RTM-B1 option