Datasheet

Version 05.00, December 2017
Rohde & Schwarz R&S
®
RTM Oscilloscope 7
Trigger A sensitivity hysteresis mode
automatic
with DC, AC, LF reject, noise reject
1 GHz, 500 MHz, 350 MHz

 


  󰇛 󰇜
(input sensitivity: [mV/div])
200 MHz, 100 MHz

 


  󰇛 󰇜
(input sensitivity: [mV/div])
20 MHz

 


  󰇛 󰇜
(input sensitivity: [mV/div])
with HF reject
all input sensitivities
1 div (meas.)
Edge trigger A and B
trigger events
rising edge, falling edge, both edges
sources for A trigger
R&S
®
RTM3002
channel 1, channel 2, logic channels from
D15 to D0 (with R&S
®
RTM-B1 option)
R&S
®
RTM3004
channel 1, channel 2, channel 3,
channel 4, logic channels from D15 to D0
(with R&S
®
RTM-B1 option)
trigger coupling of A trigger
DC
sources for B trigger
R&S
®
RTM3002
channel 1, channel 2, logic channels from
D15 to D0 (with R&S
®
RTM-B1 option)
R&S
®
RTM3004
channel 1, channel 2, channel 3,
channel 4, logic channels from D15 to D0
(with R&S
®
RTM-B1 option)
trigger coupling of B trigger
DC
selectable trigger hysteresis for A and B
trigger
small, medium, large
trigger B mode
after time or after events
trigger B minimum time
3.2 ns
trigger B maximum time
100 s
trigger B events
1 to 65535
Width trigger
trigger events
pulse width is smaller, greater, equal,
unequal, inside interval, outside interval
minimum pulse width
3.2 ns
maximum pulse width
6.8 s
polarity
positive, negative
sources
R&S
®
RTM3002
channel 1, channel 2, logic channels from
D15 to D0 (with R&S
®
RTM-B1 option)
R&S
®
RTM3004
channel 1, channel 2, channel 3,
channel 4, logic channels from D15 to D0
(with R&S
®
RTM-B1 option)
selectable trigger hysteresis
small, medium, large
Timeout trigger
trigger events
greater than timeout
minimum timeout
3.2 ns
maximum timeout
6.8 s
polarity
stays high, stays low, stays high or low
sources
R&S
®
RTM3002
channel 1, channel 2, logic channels from
D15 to D0 (with R&S
®
RTM-B1 option)
R&S
®
RTM3004
channel 1, channel 2, channel 3,
channel 4, logic channels from D15 to D0
(with R&S
®
RTM-B1 option)
selectable trigger hysteresis
small, medium, large
Video trigger
trigger events
selectable line, all lines, even frame,
odd frame, all frames
supported standards
PAL, NTSC, SECAM, PAL-M, SDTV 576i,
HDTV 720p, HDTV 1080i, HDTV 1080p
sources
R&S
®
RTM3002
channel 1, channel 2, ext. trigger input
R&S
®
RTM3004
channel 1, channel 2, channel 3,
channel 4, ext. trigger input
sync pulse polarity
positive, negative