Datasheet

Version 05.00, December 2017
22 Rohde & Schwarz R&S
®
RTM Oscilloscope
R&S
®
RTM-K6
MIL-STD-1553 triggering and decoding
Protocol configuration
source
R&S
®
RTM3002
channel 1, channel 2, logic channels from
D15 to D0 (requires R&S
®
RTM-B1 option)
R&S
®
RTM3004
channel 1, channel 2, channel 3,
channel 4, logic channels from D15 to D0
(with R&S
®
RTM-B1 option)
bit rate
standard bit rate (1 Mbit/s)
polarity
normal, inverted
label list
associate frame identifier with symbolic ID
auto threshold setup
assisted threshold configuration
timing
max response (4 µs to 200 µs)
Trigger
trigger event setup
sync, word, command word, status word,
command and data word, error condition
sync setup
all words, command/status word, data
word
word setup
all words, command word, status word,
data word
command word setup (type: address/word)
RT address (condition =, ≠, ≥, ≤, in range,
out of range); direction (T/R); subaddress
(condition =, ≠, ≥, ≤, in range, out of
range); data word count (condition =, ≠, ≥,
≤, in range, out of range)
command word setup (type: mode code)
RT address (condition =, ≠, ≥, ≤, in range,
out of range); subaddress (0, 31 or either);
mode code from labeled dropdown list
status word setup
RT address; status flags (message error,
instrumentation, service request,
broadcast command, busy, subsystem
flag, dynamic bus control, terminal flag)
individually configurable (1, 0, don’t care)
command and data word setup
transmission type (BC-RT, RT-BC, BC-
BC, mode code); RT address (condition =,
≠, ≥, ≤, in range, out of range); subaddress
(condition =, ≠, ≥, ≤, in range, out of
range); data word count (condition =, ≠, ≥,
≤, in range, out of range); data pattern up
to 4 words long (condition =, ≠, ≥, ≤, in
range, out of range); payload data index
(condition =)
error condition setup
any combination of sync error, Manchester
error, parity error, timing error (see
protocol configuration)
Decode
display signals
bus signal; symbolic ID in bus signal when
label list in use
color coding
sync, RT address, subaddress, mode
code, status bit field, data, error condition
displayed format of data
hex, decimal, binary, ASCII
frame table
decode results displayed as tabulated list,
errors highlighted in red; frame navigation;
data export as CSV file; column with
symbolic ID when label list in use
Search
search events
word, command word, mode code, status
word, command and data word, error
word setup
command, status, data
command word setup
see trigger settings for “command word
setup (type: address/word)”
mode code setup
see trigger settings for “command word
setup (type: mode code)”
status word setup
see trigger settings for “status word setup”
command and data word setup
see trigger settings for “command and
data word setup”
error condition setup
all, sync, parity, manchester, timing