Brochure
8
X-in-1 oscilloscope
Logic analyzer
The R&S®RTM-B1 option turns every R&S®RTM3000 into an intuitive-
to-use MSO with 16 additional digital channels. The oscilloscope
captures and analyzes signals from analog and digital components
of an embedded design – synchronously and time-correlated to
each other. For example, the delay between input and output of
an A/D converter can conveniently be determined using the cursor
measurements.
Protocol analyzer
Protocols such as I
2
C, SPI and CAN/LIN frequently transfer control
messages between integrated circuits. The R&S®RTM3000 has ver-
satile options for protocol-specific triggering and decoding of serial
interfaces. Selective acquisition and analysis of relevant events and
data is possible. With the hardware-based implementation, smooth
operation and a high update rate are ensured even for long acquisi-
tions. This is advantageous, for example, for capturing multiple pack-
etized serial bus signals.
Oscilloscope
With a sampling rate of up to 5Gsample/s and a memory depth
of up to 80Msample, the R&S®RTM3000 oscilloscope excels in its
class. A waveform update rate of more than 64 000 waveforms/s en-
sures a responsive instrument that reliably catches signal faults. In-
cluded tools provide quick results, e.g. QuickMeas, mask tests, FFT,
math, cursors and automatic measurements (including statistics).
Waveform and pattern generator
The integrated R&S®RTM-B6 waveform and pattern generator (up to
50Mbit/s) is useful for educational purposes and for implementing
prototype hardware. In addition to common sine, square/pulse, ramp
and noise waveforms, it outputs arbitrary waveforms and 4-bit signal
patterns. Waveforms and patterns can be imported as CSV files or
copied from oscilloscope waveforms. You can preview signals before
playing them back to quickly check signal correctness. Predefined
patterns for e.g. I
2
C, SPI, UART and CAN/LIN are provided.
RTM3000_bro_en_5214-9144-12_v0300.indd 8 30.11.2017 13:37:31