Datasheet

Version 05.00, December 2017
18 Rohde & Schwarz R&S
®
RTM Oscilloscope
R&S
®
RTM-K2
UART/RS-232/RS-422/RS-485 triggering and decoding
Bus configuration
source for RX and TX
R&S
®
RTM3002
channel 1, channel 2, logic channels from
D15 to D0 (requires R&S
®
RTM-B1 option)
R&S
®
RTM3004
channel 1, channel 2, channel 3,
channel 4, logic channels from D15 to D0
(with R&S
®
RTM-B1 option)
bit rate
300 bps to 1 Mbps or
user-selectable up to 6 Mbps
end of frame
timeout
signal polarity
idle low, idle high
data symbol size
5 bit to 9 bit
parity
none, even or odd
stop bits
1, 1.5 or 2
Idle time
up to 26.8 ms
Trigger
trigger events
start bit, start of frame, symbol number,
any symbol, pattern of symbols, parity
error, stop bit error, break
offset for trigger on data symbol
0 to 4095 symbols
data symbol pattern width
1 to floor (32/symbol size) symbols
Decode
displayed signals
bus signal, logic signal or both
color coding of bus signal
data, start, stop, error, parity
displayed format of data
ASCII, binary, decimal or hex