Datasheet

Version 05.00, December 2017
Rohde & Schwarz R&S
®
RTM Oscilloscope 11
Zoom
horizontal and vertical zoom, split screen
with overview signal and zoomed signal
Interpolation
sin(x)/x, linear, sample & hold
FFT mode
split screen with Yt diagrams and
dedicated frequency diagram, spectrogram
(with R&S
®
RTM-K18 option)
Waveform display
lines, dots only
Persistence
50 ms to 12.8 s; infinite
Special display mode
inverse brightness, waveform color modes
for analog channels (temperature, fire,
rainbow)
Diagram grid
lines, reticle, none, with annotation, track
grid
Reference signals
up to 4 reference signals
Protocol and logic
Bus decode
number of bus signals
4
1
bus types
parallel, parallel clocked
 SSPI, SPI, I
2
C (R&S
®
RTM-K1 option)
 UART/RS-232/RS-422/RS-485
(R&S
®
RTM-K2 option)
 CAN, LIN (R&S
®
RTM-K3 option)
 I
2
S, LJ, RJ, TDM (R&S
®
RTM-K5
option)
 MIL-STD-1553 (R&S
®
RTM-K6 option)
 ARINC 429 (R&S
®
RTM-K7 option)
display types
decoded bus, logical signal,
frame table (depends on decoded bus)
position and size
size and position on screen selectable
data format of decoded bus
hex, decimal, binary, octal, ASCII
1
If a bidirectional bus is used (e.g. UART RX/TX or SPI MOSI/MISO), two bus decoders are occupied.