Datasheet

Version 20.00, July 2019
38 Rohde & Schwarz R&S
®
RTE Oscilloscope
R&S
®
RTE-K57
IEEE 100BASE-T1 serial triggering and decoding
Protocol configuration
signal type
one channel differential, two channels
single-ended, optional additional use of
reverse channels for signal improvement:
one channel differential, two channels
single-ended
symbol rate
66.667 Msymbol/s, adjustable for testing
thresholds
upper/lower, assisted threshold
configuration
source
any analog input channels, math
waveforms, reference waveforms
polarity
normal, inverted
mode
slave, master
Trigger
trigger event setup
frame start
MAC frame
idle frame
error conditions
MAC frame setup
destination address (condition =, ≠, <, >,
≥, ≤, in range, out of range), source
address (condition =, ≠, <, >, ≥, ≤, in
range, out of range), length/type
(condition =, ≠, <, >, ≥, ≤, in range, out of
range), frame check (condition =, ≠, <, >,
≥, ≤, in range, out of range), data
(condition =, ≠, <, >, ≥, ≤, in range, out of
range), data index (condition =, <, >, ≥, ≤,
range)
error condition setup
preamble error, CRC error, SFD error
Decode
display type
decoded bus, tabulated list, details,
decode layers
color coding
for different cells types
data format
hex, octal, binary, signed, unsigned
decode layer
reversed bits, descrambled bits,
scrambled bits, ternary symbols
Search
search event setup
frame start
MAC frame
idle frame
error conditions
event settings
same as trigger event settings