Datasheet

Version 20.00, July 2019
Rohde & Schwarz R&S
®
RTE Oscilloscope 37
R&S
®
RTE-K55
MDIO serial triggering and decoding
Protocol configuration
bit rate
up to 5 Mbps (auto-detected)
auto threshold setup
assisted threshold configuration for
MDIO triggering and decoding
device list
associate frame address with symbolic ID
Trigger
source (clock and data)
any input channel or logical channel
trigger event setup
start, stop, ST, OP, PHY address, register
address, data
ST setup
01 (clause 22), 00 clause 45, any
OP setup
address, write, post read, read, any
PHY address setup
5 bit address (hex, decimal, octal or
binary); equal
PHY register (clause 22)/device type
(clause 45) setup
5 bit value (hex, decimal, octal or binary);
equal
data (clause 22)/data/address (clause 45)
16 bit value (hex, decimal, octal or binary);
equal
Decode
source (clock and data)
any input channel, math waveform,
reference waveform, logical channel
display type
decoded bus, logical signal, bus + logical
signal, tabulated list, decode layers
color coding
frame, PHY address, PHY register,
address, data, turnaround
PHYAD/PRTAD
symbolic names for user defined
addresses
address/data field format
hex, decimal, octal, binary, ASCII
decode layer
edges, binary
Search
source (clock and data)
any input channel, math waveform,
reference waveform, logical channel
search event setup
start, stop, ST, OP, PHY address, register
address, data
event settings
same as trigger event settings