Datasheet

Version 20.00, July 2019
Rohde & Schwarz R&S
®
RTE Oscilloscope 29
R&S
®
RTE-K6
MIL-STD-1553 serial triggering and decoding
Protocol configuration
signal type
single-ended
bit rate
standard bit rate (1 Mbit/s)
polarity
normal, inverted
device list
associate frame identifier with symbolic ID
auto threshold setup
assisted threshold configuration
timing
min. gap (2 µs to 262 µs) or off;
max. response (2 µs to 262 µs) or off
Trigger
trigger event setup
sync, word, data word, command/status
word, command word, status word, error
condition
sync and word setup
all words, command/status word, data
word
data word setup
RTA (condition =, ≠, ≥, ≤, in range, out of
range); data pattern (condition =, ≠, ≥, ≤, in
range, out of range); payload data index
(=, <, >, ≥, ≤, range); max length of data
pattern is 4 byte
command/status word setup
RTA (condition =, ≠, ≥, ≤, in range, out of
range); 11 bit pattern (condition =, ≠, ≥, ≤,
in range, out of range)
command word setup
RTA (condition =, ≠, ≥, ≤, in range, out of
range); subaddress/mode (condition =, ≠,
≥, ≤, in range, out of range); data word
count/mode count (condition =, ≠, ≥, ≤, in
range, out of range); direction (T/R)
status word
RTA (condition =, ≠, ≥, ≤, in range, out of
range); status flags (message error,
instrumentation, service request,
broadcast command, busy, subsystem
flag, dynamic bus control, terminal flag)
error condition
any combination of sync error, Manchester
error, parity error, timing error (see
protocol configuration)
Decode
source
any analog input channel, math waveform,
reference waveform
display type
decoded bus, logical signal, bus + logical
signal, tabulated list
color coding
frame (word), sync, RTA, status bit field,
parity, data field, error condition
data format
hex, octal, binary, ASCII, signed, unsigned
Search
search event setup
sync, word, data word, command/status
word, command word, status word, error
condition
event settings
same as trigger event settings