Datasheet

Version 20.00, July 2019
28 Rohde & Schwarz R&S
®
RTE Oscilloscope
R&S
®
RTE-K5
I
2
S serial triggering and decoding
Protocol configuration
signal type
I²S standard, left justified, right justified,
TDM
auto threshold setup
assisted threshold configuration for I²S
triggering and decoding
Trigger
source
any input channel or logical channel
trigger event setup
data, window, frame condition, word
select, error condition
data setup
data pattern of an audio channel up to
4 byte (hex, signed decimal, unsigned
decimal, octal or binary); condition =, ≠; ≥,
≤, <, >, in range, out of range
window setup
word count of data pattern of an audio
channel up to 4 byte (hex, signed decimal,
unsigned decimal, octal or binary);
condition =, ≠; ≥, ≤, <, >, in range, out of
range
frame condition setup
combination of audio channels in a frame,
up to 4 byte (hex, signed decimal,
unsigned decimal, octal or binary);
condition =, ≠; ≥, ≤, <, >, in range, out of
range
word select setup
rising or falling edge of word select input
channel
error condition setup
source of word select
Decode
source
any input channel, math waveform,
reference waveform, logical channel
display type
decoded bus, logical signal, bus and
logical signal, tabulated list
color coding
audio frame, frame error, incomplete
frame
data format
hex, unsigned decimal, signed decimal
(two’s complement), octal, binary, ASCII
Protocol measurements
audio display
display of audio waveform for specified
audio channels
long-term display
history of selected audio data as trace
against measurements, waveforms and
time index