Datasheet

DIP
H
H–25
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ckswitches.com
RTE
Number of Positions
RTE04
RTE10
RTE16
ESD Protection and top plate
0 Without ESD - standard plate
1 With ESD - standard plate
2
B Without ESD - black plate
Actuator
0 Flush, screwdriver slot
2 Shaft for button
Terminations
N Thru-hole
V Right angle
G Surface mount
R Reverse, thru-hole
Switch Function
0 Single pole
1
1 BCD code
3 Gray Code (for RTE 10)
4 Hexadecimal code (for RTE 16)
7 Gray Code (for RTE16)
Contact/Terminal Material
4 Gold/ lead free tin
1 - Single pole function not available for RTE10/RTE16
2 - ESD protection available with “N” and “R” terminations only
RTE Series
Low Profile Rotary DIP Switches
Features/Benefits
•
Thru-hole and surface mount
models
• Miniature size with robust
metal cover in black or
silver nickel finish
• 4, 10, & 16 positions
• Large choice of codings
• Vertical, right angle or reverse
versions
• RoHS compliant
Typical Applications
•
Timers, automation components
• Computer and peripherals
• Alarms, access control,
smoke detectors, lighting,
home protection
• Instrumentation
Specifications
CONTACT RATING:
Gold: 100 mA max. 10µ A min. 30 V DC max. 20 mVDC min.
MECHANICAL LIFE: 20,000 indexations
CONTACT RESISTANCE: 100 mΩ max. initial;
150 mΩ after life
INSULATION RESISTANCE: 10
10
Ω min. initial
DIELECTRIC STRENGTH: 300 Vrms 1 mn
OPERATING TEMPERATURE: -25°C to 85°C.
STORAGE TEMPERATURE: -55°C to 85°C.
PACKAGING:
How To Order
The Build-A Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing
of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box.
NOTE: Some of the configurations may not be available or could require some development.
Materials
COVER: Brass, nickel plated (black or silver)
BASE: PPS
ACTUATOR: LCP
MOVABLE CONTACTS: Copper alloy, gold plated.
STATIONARY CONTACTS: Brass, gold plated.
TERMINALS: See page I-28 to I-29
O-RING: Silicone
SOLDERING PROCESS:
- Surface Mount Terminals: Infrared Reflow Soldering in accor
-
dance with IEC 61760-1.
- Non Reverse Thru-Hole Terminals: Lead free single or double
wave soldering process according to C&K Procedure
PS-LF-001
- Reverse Thru-Hole Terminals: Manual soldering: 3 sec / 350°C.
Lead free single wave soldering process can be used but
validation of the process must be done by customer
Quantities
Terminations Actuator Tube
Box
(in bulk)
Carrier
tape
Standard
Package
G
Flush, screwdriver slot 1250 1250 (1 reel)
Shaft for button 750 750 (1 reel)
N All versions 65 1950 (30 tubes)
V All versions 150 1500 (10 boxes)
R
Flush, screwdriver slot 65 1950 (30 tubes)
Shaft for button 150 1500 (10 boxes)
Note: Specifications and materials listed above are for
switches with standard options. For information on specific
and custom switches, consult Customer Service Center.
26 January 2018