Datasheet

Version 03.00, June 2017
Rohde & Schwarz R&S
®
RTC1000 Digital Oscilloscope 13
R&S
®
RTC-K1
I
2
C triggering and decoding
Bus configuration
sources for SCL and SDA
channel 1, channel 2, logic channels from
D7 to D0
bit rate
up to 10 Mbps
size of address
7 bit or 10 bit
size of data
8 bit
label list
associate frame identifier with symbolic ID
Trigger
trigger events
start, stop, restart, missing acknowledge,
address (7 bit or 10 bit), data, address
and data
offset for trigger on data
0 data byte to 4095 data byte
data pattern width
up to 3 sequential data byte
Decode
displayed signals
bus signal, logic signal or both
color coding of bus signal
address, data, start, stop, ACK, NACK;
error and trigger event are displayed in
different colors
displayed format of address
hex
displayed format of data
ASCII, binary, decimal or hex
SPI triggering and decoding
Bus configuration
sources for CS, CLK, data
channel 1, channel 2, logic channels from
D7 to D0, extern input (only CS)
bit rate
up to 25 Mbps
chip select (CS)
active low, active high or missing
(two-wire SPI)
clock (CLK) slope
rise or fall
data symbol size
1 bit to 32 bit
idle time for two-wire SPI
< 1 ms
Trigger
trigger events
start of frame, end of frame, bit number,
data pattern
selectable bit number
0 to 4095
offset for trigger on data pattern
0 to 4095 bit
data pattern size
1 bit to 32 bit
Decode
displayed signals
bus signal, logic signal or both
color coding of bus signal
data, start, stop; error and trigger event
are displayed in different colors
displayed format of data
ASCII, binary, decimal or hex
data decoding
MSB or LSB first
R&S
®
RTC-K2
UART/RS-232/RS-422/RS-485 triggering and decoding
Bus configuration
source for data
channel 1, channel 2, logic channels from
D7 to D0
bit rate
300/600/1200/2400/4800/9600/14400/
19200/28800/38400/56000/57600/
115200 bps
128 kbps/256 kbps/1 Mbps or
user-selectable up to 3 Mbps
end of frame
timeout, none
signal polarity
idle low, idle high
data symbol size
5 bit to 9 bit
parity
none, even or odd
stop bits
1, 1.5 or 2
Trigger
trigger events
start bit, start of frame, symbol number,
any symbol, pattern of symbols, parity
error, frame error, break
offset for trigger on data symbol
0 to 4095 symbols
data symbol pattern width
1 to floor (32/symbol size) symbols
Decode
displayed signals
bus signal, logic signal or both
color coding of bus signal
data, start, stop; error and trigger event
are displayed in different colors
displayed format of data
ASCII, binary, decimal or hex