Datasheet

Version 03.00, June 2017
Rohde & Schwarz R&S
®
RTC1000 Digital Oscilloscope 11
Options
R&S
®
RTC-B1
Mixed signal option, additional 8 logic channels
Vertical system
Input channels
8 logic channels (D7 to D0)
Arrangement of input channels
assignment of the logic probes to the
channels D7 to D0
Input impedance
100 kΩ ± 2 % || ~4 pF (meas.) at probe
tips
Maximum input frequency
signal with minimum input voltage swing
and hysteresis setting: normal
300 MHz (meas.)
Maximum input voltage
±40 V (V
p
)
Minimum input voltage swing
hysteresis small
300 mV (V
pp
) (meas.)
hysteresis medium
800 mV (V
pp
) (meas.)
hysteresis large
1500 mV (V
pp
) (meas.)
Threshold groups
D7 to D0
Threshold level
range
–2 V to 8 V in 10 mV steps
predefined
CMOS, TTL, ECL
Threshold accuracy
±(100 mV + 3 % of threshold setting)
(meas.)
Comparator hysteresis
small, medium, large
Horizontal system
Channel-to-channel skew
max. 1 ns (meas.)
Acquisition system
Sampling rate
1 Gsample/s for every channel
Memory depth
1 Msample for every channel
Trigger system
see Trigger system
Waveform measurements
Measurement sources
all channels from D7 to D0
Automatic measurements
positive pulse width, negative pulse width,
period, frequency, burst width, delay,
phase, positive duty cycle, negative duty
cycle, positive pulse count, negative pulse
count, rising edge count, falling edge
count, value at the cursor position
Additional cursor function
display of decoded parallel bus value at
the cursor position
Display characteristics
Channel activity display
Independent of the scope acquisition, the
state (stays low, stays high or toggles) of
the channels from D7 to D0 is displayed.