R&S®RTC1000 Digital Oscilloscope Specifications Data Sheet | Version 03.00 year RTC1000_dat-sw_en_ 3607-4287-22_v0300_Cover.indd 1 19.06.
Version 03.00, June 2017 CONTENTS Definitions ....................................................................................................................................................................... 3 Base unit .......................................................................................................................................................................... 4 Vertical system ................................................................................................
Version 03.00, June 2017 Definitions General Product data applies under the following conditions: Three hours storage at ambient temperature followed by 20 minutes warm-up operation Specified environmental conditions met Recommended calibration interval adhered to All internal automatic adjustments performed, if applicable Specifications with limits Represent warranted product performance by means of a range of values for the specified parameter.
Version 03.00, June 2017 Base unit Vertical system Input channels Input impedance Analog bandwidth (–3 dB) Lower frequency limit (–3 dB) Analog bandwidth limits (max. –1.8 dB, min. –3.
Version 03.00, June 2017 Trigger system Trigger level Trigger modes Hold-off range Trigger types Edge trigger range (min) time trigger events sources coupling (analog channels, external trigger input) Pulse trigger trigger events min. pulse width max.
Version 03.
Version 03.
Version 03.
Version 03.
Version 03.00, June 2017 General data Display Type Resolution Temperature Temperature loading 6.
Version 03.
Version 03.00, June 2017 R&S®RTC-B6 Waveform generator Resolution Sample rate Amplitude DC offset Sine/rectangle Pulse Ramp/triangle 4-bit pattern generator Functions 8 bit 978 ksample/s level high-Z accuracy level high-Z accuracy frequency frequency frequency bit rate UART SPI I2C Programmable pattern ±3 V 3 % or ± 25 mV (meas.) 0.1 Hz to 50 kHz 0.1 Hz to 10 kHz 0.1 Hz to 10 kHz bus signal source 4-bit counter, programmable 4-bit pattern approx. 2.
Version 03.
Version 03.
Version 03.00, June 2017 LIN triggering and decoding Bus configuration version bit rate Trigger polarity label list source trigger events identifier setup data setup Decode displayed signals color coding of bus signal displayed format of data frame table Search search events frame event setup error event setup identifier setup data setup event table 1.3, 2.x or SAE J602; mixed traffic is supported 1.2/2.4/4.8/9.6/10.417/19.
Version 03.00, June 2017 Ordering information Designation Type Order No. Choose your R&S®RTC1000 base model Digital Oscilloscope, 50 MHz, 2 channels R&S®RTC1002 1335.7500.02 Base unit (including standard accessories: R&S®RT-ZP03 passive probe per channel, power cord, R&S®RT-ZA11 adapter BNC/banana, getting started manual and safety instructions) Choose your bandwidth upgrade Upgrade of R&S®RTC1002 to 70 MHz bandwidth R&S®RTC-B220 1335.7300.02 Upgrade of R&S®RTC1002 to 100 MHz bandwidth R&S®RTC-B221 1335.
Version 03.00, June 2017 Warranty Base unit All other items 3 Options Extended Warranty, one year Extended Warranty, two years Extended Warranty with Calibration Coverage, one year Extended Warranty with Calibration Coverage, two years Extended Warranty with Accredited Calibration Coverage, one year Extended Warranty with Accredited Calibration Coverage, two years 3 years 1 year R&S®WE1 R&S®WE2 R&S®CW1 R&S®CW2 R&S®AW1 R&S®AW2 Please contact your local Rohde & Schwarz sales office.
Version 03.
Version 03.
Service that adds value Worldwide Local and personalized ❙ Customized and flexible ❙ Uncompromising quality ❙ Long-term dependability ❙ ❙ Rohde & Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, monitoring and network testing.
