Brochure
Rohde & Schwarz R&S®RTC1000 Oscilloscope 7
Component tester
You will also benefit from the included component tester. A 50Hz and a 200Hz
measuring frequency are provided to support your potentially tedious search
for faulty components. And since a picture says more than a thousand words
– or rather a thousand values – you will be able to tell at a glance if your error
analysis is on track.
Mask test mode
Mask tests quickly reveal whether a specific signal lies within defined tolerance
limits. Masks assess the quality and stability of a DUT based on statistical pass/
fail evaluation. Signal anomalies and unexpected results are quickly identified.
When the mask is violated, the measurement stops. Each violation generates a
pulse output at the AUX-OUT connector of the R&S®RTC1000. This pulse out-
put can be used to trigger actions in the measurement setup.
Digital voltmeter
For simultaneous measurements, the R&S®RTC1000 features a 3-digit digital
voltmeter (DVM) and six-digit frequency counter on each channel. Provided
measurement functions include DC, AC + DC (RMS) and AC (RMS).
Frequency analysis mode
Difficult-to-find faults often result from the interaction between time and fre-
quency signals. The FFT function of the R&S®RTC1000 is activated at the push
of a button and by simply entering the center frequency and span. Thanks to
the R&S®RTC1000 oscilloscopes’ high-performance FFT functionality, signals
can be analyzed with up to 128k points. Other practical tools include cursor
measurements and autoset in the frequency domain.
RTC1000_bro_en_3607-4287-12_v0400.indd 7 10.01.2018 12:25:18