Brochure
6
X-in-1 oscilloscope
Logic analyzer
The R&S®RTC-B1 option turns every R&S®RTC1000 into an intuitive-to-use MSO
with 8additional digital channels. The oscilloscope captures and analyzes sig-
nals from analog and digital components in an embedded design – synchro-
nously and time-correlated to each other. For example, the delay between the
input and output of an A/D converter can be conveniently determined using the
cursor measurements.
Protocol analyzer
Protocols such as I
2
C, SPI and CAN/LIN frequently transfer control messages
between integrated circuits. The R&S®RTC1000 has versatile options for proto-
col-specific triggering and decoding of serial interfaces. Selective acquisition
and analysis of relevant events and data is possible. With the hardware-based
implementation, smooth operation and a high update rate are ensured even
for long acquisitions. This is advantageous, for example, for capturing multiple
packetized serial bus signals.
Oscilloscope
With a sampling rate of up to 2Gsample/s and a memory depth of up to
2Msample, the R&S®RTC1000 oscilloscope excels in its class. A waveform up-
date rate of more than 10 000 waveforms/s ensures a responsive instrument
that reliably catches signal faults. Included tools provide quick results, e.g.
QuickView, mask tests, FFT, math, cursors and automatic measurements
(including statistics).
Waveform and pattern generator
The integrated R&S®RTC-B6 waveform and pattern generator up to 50Mbit/s is
useful for educational purposes and for implementing prototype hardware. In
addition to common sine, square/pulse, ramp and noise waveforms, it outputs
4-bit patterns. Waveforms and patterns can be imported as CSV files or copied
from oscilloscope waveforms. You can preview signals before playing them
back to quickly check signal correctness. Predefined patterns for e.g. I
2
C, SPI,
UART and CAN/LIN are provided.
RTC1000_bro_en_3607-4287-12_v0400.indd 6 10.01.2018 12:25:18