Datasheet

8
X-in-1 oscilloscope
Logic analyzer
The R&S®RTB-B1 option turns every R&S®RTB2000 into an intu-
itive-to-use MSO with 16 additional digital channels. The oscil-
loscope captures and analyzes signals from analog and digital
components of an embedded design – synchronously and time-
correlated to each other. For example, the delay between input and
output of an A/D converter can conveniently be determined using
the cursor measurements.
Protocol analyzer
Protocols such as I
2
C, SPI and CAN/LIN frequently transfer control
messages between integrated circuits. The R&S®RTB2000 has ver-
satile options for protocol-specific triggering and decoding of serial
interfaces. Selective acquisition and analysis of relevant events and
data is possible. With the hardware-based implementation, smooth
operation and a high update rate is ensured even for long acquisi-
tions. This is advantageous, for example, to capture multiple pack-
etized serial bus signals.
Oscilloscope
With a sampling rate of up to 2.5Gsample/s and a memory depth
of up to 20Msample, the R&S®RTB2000 oscilloscope excels in its
class. A waveform update rate of more than 50 000 waveforms/s
ensures a responsive instrument that reliably catches signal faults.
Included standard tools provide quick results, e.g. QuickMeas,
mask tests, FFT, math, cursors and automatic measurements, in-
cluding statistics.
Waveform and pattern generator
The integrated R&S®RTB-B6 waveform and pattern generator up to
50Mbit/s is useful for educational purposes and for implementing
prototype hardware. Apart from the common sine, square/pulse,
ramp and noise waveforms, it outputs arbitrary waveforms and
4-bit signal patterns. Waveforms and patterns can be imported as
CSV files or copied from oscilloscope waveforms. Before playing
signals back, the user can preview them to quickly check signal
correctness. Predefined patterns for e.g. I
2
C, SPI, UART and
CAN/LIN can be used.
RTB2000_bro_en_3607-4270-12_v0202.indd 8 16.02.2017 11:57:16