Datasheet
¸RTB2000
❙ 10-bit vertical resolution
Traditional scope
❙ 8-bit vertical resolution
4 mV
1 mV
Finest resolution for a 1 V signal
4
10-bit vertical resolution
The R&S®RTB2000 features a customized Rohde & Schwarz
engineered 10-bit A/D converter that delivers a four-
fold improvement compared to conventional 8-bit A/D
converters.
The increased resolution results in sharper waveforms with
more signal details that would otherwise be missed. One
example is the characterization of switched-mode power
supplies. The voltages across the switching device must
be determined during the on/off times within the same ac-
quisition. For precise measurements of small voltage com-
ponents, a high resolution of more than 8-bit is essential.
1mV/div: full measurement bandwidth and low
noise
The R&S®RTB2000 oscilloscope offers an outstanding sen-
sitivity down to 1 mV/div. Traditional oscilloscopes reach
this level of input sensitivity only by employing software-
based magnification or by limiting the bandwidth. The
R&S®RTB2000 oscilloscope shows the signal’s real sam-
pling points over the full measurement bandwidth – even
at 1mV/div. This ensures high measurement accuracy.
The accuracy of a signal displayed on the screen depends
on the oscilloscope’s inherent noise. The R&S®RTB2000
oscilloscope precisely measures even at the smallest verti-
cal resolution by using low-noise frontends and state-of-
the-art A/D converters.
See small signal
details in the
presence of large
signals
10-bit A/D converter: uncovers even small signal
details
❙ 10-bit A/D converter resolution
❙ 1mV/div true vertical resolution
The Rohde & Schwarz designed
10-bit A/D converter ensures
highest signal fidelity at highest
resolution.
RTB2000_bro_en_3607-4270-12_v0202.indd 4 16.02.2017 11:57:09