Datasheet

3
Subject to change without notice
Specications
Specifications
Set of RT-ZD02 probe consists of:
1 RT-ZD02 200 MHz differential probe 1 piece
2 Hook Clip, red 1 piece
Hook Clip, black 1 piece
3 Alligator Clip, red 1 piece
Alligator Clip, black 1 piece
4 USB Power Cord (2 m) 1 piece
5 9 V Battery 1 piece
Manual 1 piece
Electrical specications
Bandwidth (-3 dB): 200 MHz, typ.
Attenuation Ratio: 10 : 1
Probe Risetime (10%-90%): 1.75 ns
Gain Accuracy: ±1%, typ.
Absolute Maximum Rated Input Voltage
(each side to ground): ±60 V
Maximum Differential
Input Voltage (DC+AC Peak): ±20 V
Maximum Common
Mode Input Voltage ±60 V
Input Resistance / Input capacity
each side to ground: 500 kΩ, 7 pF
between inputs: 1 MΩ, 3.5 pF
Output Voltage Swing: ±2 V (driving 50 Ω scope input)
Offset: ±2 mV, typ.
CMRR: -80 dB at 60 Hz, typ.
-50 dB at 10 MHz, typ.
Power Requirements: one 9 V battery or USB power
adapter (5 V to 9 V, 200 mA)
Approx. Battery Life: 7.5 hours (alkaline battery)
Battery/Power Cord: The supplied voltage must be
less than 12 V and greater than
4.5 V or else the probe could be
damaged
Mechanical specications
Approximate Weight: 170 g
(not including battery and
accessories)
BNC Cable Length: 120 cm
Length of Input Leads: 15 cm
Dimensiones (LxWxH): 111 x 22 x 14 mm
Environmental specications
Temperature range
operating: 5 °C to +40 °C
non-operating: -20 °C to +70 °C
Altitude operating: 3,000 m
non-operating: 15,300 m
Humidity: 25 - 85% (indoor use only)
SPECIFICATIONS
all data valid at 23 °C after 30 minutes warm up
RT-ZD02
4
2
3
5
1