Datasheet

16
Special functions
Output ramp function EasyRamp
EasyRamp time 10 ms to 10 s (10 ms increments)
Output sequencing
Synchronicity typ. < 25 μs
Delay per channel 1 ms to 10 s (1 ms increments)
Arbitrary function QuickArb
Parameters voltage, current, time
Maximum number of points 4096
Dwell time 1 ms to 20 h (1 ms increments)
Repetition continuous or burst mode with 1 to 65535
repetitions
Trigger manually via the keyboard, via remote control or
via optional interface
Digital trigger and control interfaces digital I/O, R&S®NGM-K103
Max. voltage (IN/OUT) 24 V
Pull-up resistors (IN/OUT) connected to 3.3 V 20 kΩ
Input level low < 0.8 V
high > 2.4 V
Maximum drain current (OUT) 500 mA
Data logging standard mode
Maximum acquisition rate 10 sample/s
Memory depth internal 800 Mbyte or external memory size
Voltage resolution see readback resolution
Voltage accuracy see readback accuracy
Current resolution see readback resolution
Current accuracy see readback accuracy
Data logging fast mode FastLog
Maximum acquisition rate 500 ksample/s (2 μs)
Memory depth external memory size
Voltage resolution 20 V range: 20 μV
5 V range: 5 μV
Voltage accuracy ±(% of output + offset) 20 V range: 0.02 % + 2 mV
5 V range: 0.02 % + 500 μV
Current resolution 10 A range: 20 μA
1 A range: 2 μA
100 mA range: 200 nA
10 mA range: 20 nA
Current accuracy ±(% of output + offset) 10 A range: 0.05 % + 2.5 mA
1 A range: 0.05 % + 1 mA
100 mA range: 0.05 % + 100 μA
10 mA range: 0.05 % + 15 μA
Digital voltmeter input optional, R&S®NGM-K104
DVM voltage –5 V to +23 V
DVM accuracy ±(% of output + offset) < 0.02 % + 2 mV
Display and interfaces
Display TFT 5" 800 × 480 pixel WVGA touch
Front panel connections R&S®NGM201 4 mm safety sockets (channels, sense)
R&S®NGM202 4 mm safety sockets (channels)
Rear panel connections 8-pin connector block per channel
Remote control interfaces standard USB-TMC, USB-CDC (virtual COM port),
LAN
R&S®NGM-K102 WLAN
R&S®NGM-B105 IEEE-488 (GPIB)
NGM200_dat_en_3609-1685-32_v0100.indd 16 22.05.2019 11:54:19