User Manual

Remote Control Commands
R&S
®
NGL200
117User Manual 1178.8736.02 ─ 02.01
DEF
Internal memory
Example:
ARB:FNAM "01.CSV"
ARB:FNAM? INT -> "01.CSV"
ARBitrary:LOAD
Loads the stored arbitrary waveform of the previous selected channel and memory.
Usage: Event
ARBitrary:REPetitions
<repetition_rate>
ARBitrary:REPetitions?
Sets/Queries the repetition rate of the defined arbitrary waveform for the previous
selected channel. Up to 255 repetitions are possible. If the repetition rate „0“ is
selected the arbitrary waveform of the previous selected channel will be repeated infin-
itely.
Parameters:
repetition_rate Range: 0 to 65535
The "0" indicates infinite repetition.
Example:
INST OUT1
ARB:REP 10
ARB:REP? -> 10
The return repetition rate of the Ch1 arbitrary waveform is 10.
ARBitrary:SAVE
Save the current arbirary table to a file (filename specified with 'arb:fname').
Example:
INST OUT1
ARB:DATA 10,1,0.5,0
ARB:REP 10
ARB:FNAM "ARB03.CSV“,INT
ARB:SAVE
Save a predefined arbitrary data to a filename ARB03.CSV in
the internal memory location.
Usage: Event
ARBitrary:TRANsfer <channel>
Transfers the defined arbitrary table to the selected channel.
Parameters:
<channel> 1 | 2 | 3 | 4
Example: See Example "Configuring an arbitrary sequence" on page 114.
Arbitrary Setting Commands