User Manual
Table Of Contents
- R&S NGL200
- Safety Instructions
- Customer Support
- Contents
- 1 Preface
- 2 Welcome to R&S NGL200
- 3 Important Notes
- 4 Getting Started
- 5 Operating Basics
- 6 Instrument Functions
- 7 Remote Control Commands
- Annex
- List of Commands
- Index
Remote Control Commands
R&S
®
NGL200
106User Manual 1178.8736.02 ─ 02.01
Parameters:
<channel> 1 | 2 | 3 | 4
Example: See Example "Configuring fuses" on page 102.
Usage: Setting only
FUSE[:STATe] <state>
FUSE[:STATe]?
Sets/Queries the fuse function in the selected channel.
Parameters:
<state> OFF | ON | 0 | 1
ON | 1
Fuse function is activated.
OFF | 0
Fuse function is not activated.
Example: See Example "Configuring fuses" on page 102.
7.5.8 OVP Setting
The VOLTage:PROTection subsystem contains the commands for setting the over-
voltage protection parameters for the output channels. The default unit is V.
Configuration Commands