R&S®NGE100 Power Supply Series Reduced to the max Product Brochure | Version 01.01 year NGE100_bro_en_5214-8748-12_v0101.indd 1 21.02.
R&S®NGE100 Power Supply Series At a glance The R&S®NGE100 power supply series consists of robust, high-performance, affordable instruments. They offer high efficiency combined with low ripple plus a variety of comfort functions that are not usually found in this class of power supplies. The R&S®NGE100 power supply series consists of the R&S®NGE102 two-channel power supply and the R&S®NGE103 three-channel power supply. Both instruments provide up to 33.6 W output power per channel.
R&S®NGE100 Power Supply Series Benefits and key features Meets your daily needs ❙ All channels are galvanically separated and earth-free ❙ All channels are electrically equivalent with the same voltage, current and power ❙ Parallel and serial operation through V/I tracking ❙ Short-circuit-proof outputs ❙ Protection functions to safeguard instrument and DUT ❙ Modern architecture; small, compact and quiet ❙ Tailored to be used in education, labs and system racks ▷ page 4 Easy operation ❙ ❙ ❙ ❙ ❙ Straightfor
Meets your daily needs All channels galvanically separated and earth-free The R&S®NGE102 and R&S®NGE103 power supplies offer the choice between 2 or 3 channels. The circuitry of each single channel is completely separated from the others, there is no connection to chassis ground. This makes it easy to combine the channels to drive balanced circuitries that might need +12 V/–12 V, for example, and avoids any ground problems in complex DUTs.
Easy operation Straightforward operation All basic R&S®NGE100 power supply functions can be operated via direct keys on the front panel – no need to maneuver through a jungle of menus. Just press the "Voltage" key, select an output channel and use the rotary knob or the arrow keys to adjust the desired voltage in steps down to 10 mV. A constant output current can be similary set in steps down to 1 mA.
Connectivity – everything you need Front connectors with 4 mm screw-type sockets The output connectors on the front of the R&S®NGE100 power supplies can hold 4 mm banana plugs or they can clamp stripped cables as very often seen in educational applications. The design of the connectors is robust enough to survive generations of students. USB interface (virtual COM port and TMC class) Via the USB interface, the instrument can be controlled from external PCs.
Specifications All data is valid at +23 °C after 30 minutes warm-up time.
Electrical data Trigger input Minimum trigger interval Trigger response time Trigger level Edge direction Arbitrary function (EasyArb) Parameter Maximum number of points Dwell time Repetition mode 10 ms < 100 ms TTL rising, falling voltage, current, time 128 10 ms to 600 s continuous or burst mode with 1 to 255 repetitions manually, remote control or via optional trigger input (R&S®NGE-K103 option) Trigger Interfaces Front panel connectors Remote interfaces Trigger and control interface channel outputs
Ordering information Designation Base unit Two-Channel Power Supply Three-Channel Power Supply Accessories supplied Set of power cables, quick start guide Software options Ethernet Remote Control Wireless LAN Remote Control Digital Trigger I/O System components 19”Rack Adapter, 2 HU Type Order No. R&S®NGE102 R&S®NGE103 5601.1414.02 5601.1414.03 R&S®NGE-K101 R&S®NGE-K102 R&S®NGE-K103 5601.2204.03 5601.2210.03 5601.2227.03 R&S®HZC95 5800.2054.
Service that adds value ❙ ❙ ❙ ❙ ❙ Worldwide Local and personalized Customized and flexible Uncompromising quality Long-term dependability Rohde & Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, monitoring and network testing.
