User Manual

Remote Control

R&S

NGE100B

80User Manual 5601.1343.02 ─ 04

Return values:

<arg0>

Usage: Query only

HCOPy:SIZE:X?

This command returns the horizontal expansion of the screenshots.

Return values:

<arg0>

Usage: Query only

HCOPy:SIZE:Y?

This command returns the vertical expansion of the screenshots.

Return values:

<arg0>

Usage: Query only

6.5.5 Channel Selecting

INSTrument:NSELect <arg0>

This command defines or queries the numeric selection of a channel. Each channel of

the power supply is considered as separate "instrument“, which is required by the SCPI

standard.

Parameters:

<arg0> {1 | 2 | 3}

Example:

INSTrument:NSELect 1

Selects the output channel as Ch 1.

Note: Channel 3 is only valid for NGE103B.

INSTrument:NSELect? -> 1

Return the numeric channel selection.

INSTrument[:SELect] <arg0>

This command defines or queries the channel selection. Each channel of the power

supply is considered as separate "instrument", which is required by the SCPI standard.

Parameters:

OUT1 | OUT2 | OUT3

OUTPut1 | OUTP1

Ch 1

Remote Control - Commands