User Manual

Remote Control
R&S
®
NGE100B
62User Manual 5601.1343.02 ─ 04
Figure 6-1: Device manager
6.1.2 LAN
For direct connection to a host (PC) or indirect connection via a switch, a double shiel-
ded network cable (e.g. CAT.5, CAT.5e, CAT.5 +, CAT.6 or CAT.7) is required and
equipped with an Ethernet plug type (RJ-45 type connector) on both sides. As a net-
work cable, either an uncrossed or a cross-over cable can be used.
It is possible to perform a complete parameter setting via the manual assignment of a
fixed IP address or automatic assignment of a dynamic IP address allocation. Please
contact your IT administrator to make the correct settings.
For more information on the LAN settings, see Chapter 5.6.1.1, "Wired Connection",
on page 49.
6.1.3 WLAN
Wi-Fi Transmitter Performance
Frequency range: 2412 MHz to 2484 MHz
Power: 19.5 dBm typical
Interfaces and Protocols