User Manual

Instrument Functions
R&S
®
NGE100B
51User Manual 5601.1343.02 ─ 04
a) Select "Interface > Ethernet" menu item.
The R&S NGE100B displays the "Ethernet" dialog. See Figure 5-20.
Figure 5-20: Ethernet dialog
b) Select "DHCP & Auto-IP" for "IP Mode".
c) Enter the "IP Address".
d) Enter the "Subnet Mask".
e) Enter the "Default Gateway".
f) Select "Apply" to complete the configuration.
g) Press Menu key to exit the dialog.
When the connection is alive, the LXI icon turns green on the status bar.
Table 5-13: Ethernet input field
Ethernet input field Description
MAC Address Shows the MAC address of this instrument.
Status Shows if the connection is up or down.
IP Mode Static & Manual: Manually configure an IP address
for the instrument.
DHCP & Auto-IP: Automatically assign an IP
address to the instrument.
IP Address Address used in communication with the network.
Manually configure this field if IP Mode set to "Static
& Manual".
Subnet Mask Secondary address used in communication with the
network.
Manually configure this field if IP Mode set to "Static
& Manual".
Default Gateway Gateway address to connect to the network.
Manually configure this field if IP Mode set to "Static
& Manual".
LAN Reset Restores the LAN settings to factory default.
It also removes the LXI web password.
Apply Apply static IP settings.
Connecting to a Network