User Manual

Instrument Functions
R&S
®
NGE100B
46User Manual 5601.1343.02 ─ 04
Figure 5-17: Ramping voltage output
1. Select "Output > EasyRamp" menu item.
The R&S NGE100B displays the "EasyRamp" dialog. See Figure 5-18.
Figure 5-18: EasyRamp dialog
2. Select the desired channel.
3. Set the selected channel to "Enabled".
The R&S NGE100B enabled the EasyRamp function for the selected channel.
Note: If selected channel is set disabled, corresponding output state of the selected
channel is also disabled.
4. Set the "Ramping Time" of the selected channel.
5. Press Enter key to confirm the settings.
Table 5-10: EasyRamp input field
EasyRamp input field Description
Ch 1, Ch 2, Ch 3 Enable or disable the EasyRamp function individu-
ally for each channel.
Ramping Time Duration taken for the voltage to rise to V
set
Advanced Functions