User Manual

Instrument Functions
R&S
®
NGE100B
45User Manual 5601.1343.02 ─ 04
7. Press "Clear" to reset the EasyArb table values.
All the EasyArb data points are clear from Ch 1.
See Table 5-9.
8. Press Menu key to return to the Channel display area.
The Enter key is illuminated.
9. Press Output key to enable R&S NGE100B output.
10. Press Enter key to start the EasyArb function.
11. Long press on the Enter key to stop the EasyArb function.
Table 5-9: EasyAab input field
EasyArb input field Description
EasyArb Mode Enable or disable the EasyArb function.
If enabled, the EasyArb function is activated in Ch 1.
See "EasyArb function" on page 44.
Data Points Set the number of data points in the EasyArb table.
Each data point contains the settings for "Voltage",
"Current" and "Duration".
Repetition Set the number of times the waveform is output in
the EasyArb table. If this is set to "0", the waveform
is output continuously.
EasyArb table Configures the EasyArb data table. Use the arrow
keys to navigate the "Voltage", "Current" and "Dura-
tion" settings.
Clear Reset all the data points in the EasyArb table to
0.00 V, 1.000 A and 0.01 s for "Voltage", "Current"
and "Duration" respectively.
Apply Select "Apply" to save EasyArb configuration.
5.5.4 EasyRamp
With EasyRamp, the R&S NGE100B provides you the operating condition to output a
constant rise of the supply voltage. The output voltage can be increased continuously
within a 10 ms to 10 s timeframe. See Figure 5-17.
Advanced Functions