User Manual

Instrument Functions
R&S
®
NGE100B
40User Manual 5601.1343.02 ─ 04
Auto save instrument settings
Auto save of instrument settings are applied when any of the following parameters are
changed:
●
General instrument settings
●
USB connection mode
●
WLAN settings
– "Module"
– "SSID"
– "Password"
●
Ethernet
The instrument settings can be stored or recalled from memory locations M1 to M5.
The following instrument settings are stored or recalled in the memory location:
●
Fuse settings
●
Protection settings
●
EasyRamp settings
●
Set voltage level
●
Set current level
●
1
EasyArb settings
●
1
Digital IO settings
1
The EasyArb or DIO settings can only be saved in the respective dialog environment
and all other above instrument settings are not saved when a store function is made.
When a recall function is made on the same stored memory location, only the EasyArb
or DIO settings are recalled.
Store instrument settings
1. Long press Store Recall key to store instrument settings.
The R&S NGE100B displays a message in the status bar "Store device settings:
select any [Mx] key".
Basic Functions