User Manual

Instrument Functions
R&S
®
NGE100B
34User Manual 5601.1343.02 ─ 04
Menu Menu items Descriptions
EasyArb Programs the waveform of the instrument voltage and cur-
rent settings for Ch 1. See Chapter 5.5.3, "EasyArb",
on page 44.
EasyRamp Configures the ramping time of the voltage for selected
channel. See Chapter 5.5.4, "EasyRamp", on page 45.
Table 5-6: Interface menu hierarchy
Menu Menu items Descriptions
Interface Ethernet Configures the Ethernet interface. See Figure 5-20.
The Ethernet option NGE-K101 must be installed for this
function to be available in the instrument.
WLAN Configures the WLAN interface. See Figure 5-21.
The WLAN option NGE-K102 must be installed for this
function to be available in the instrument.
Digital IO Configures the Digital Trigger I/O settings.
The Digital Trigger I/O option NGE-K103 must be installed
for this function to be available in the instrument.
USB Configures the USB connection. See Figure 5-23.
Requires restart of the instrument to apply the setting.
Table 5-7: Device menu hierarchy
Menu Menu items Descriptions
Device Information Displays instrument information. See Chapter 5.7.1,
"Instrument Information", on page 54.
General Configures general instrument settings. Chapter 5.7.2,
"General Instrument Settings", on page 54.
License Displays license information and install license options.
See Chapter 5.7.3, "Managing Options", on page 55.
Reset Resets instrument to factory default settings. See Chap-
ter 5.7.4, "Reset Instrument", on page 56.
Table 5-8: Utilities menu hierarchy
Menu Menu items Descriptions
Utilities System Test Provides self-test function for display screen, keypad back-
light, beeper and fan. See Chapter 5.7.5, "System Test",
on page 57.
Update Performs firmware update on the instrument. See Chap-
ter 5.7.6, "Updating the Firmware", on page 58.
Service This function is restricted for service personnel only.
Help Provides help information for the instrument. See Chap-
ter 5.7.7, "Help", on page 59.
User Interface