User Manual

Instrument Functions
R&S
®
NGE100B
31User Manual 5601.1343.02 ─ 04
Figure 5-4: Virtual keyboard
Invoke the virtual keyboard as follows:
1. Move the cursor to the desired input field.
2. Press Enter key. The virtual keyboard appears.
3. Once on the keyboard screen, press the arrow keys or turn the rotary knob to go to
the desired character.
4. Press the rotary knob to select the character.
Select
key if you want to create a space between characters.
To delete the last entered character, select the key.
To delete the current entry, select the key.
Select the key to alternate between capital and small capital letters.
5. Repeat step 3 and 4 until all the characters are entered.
6. Select "OK" to confirm the input and exit the screen.
Select "ESC" or press Menu key to exit the screen without saving the changes.
5.1.4 Navigation Controls
Navigation and value setting are done via the rotary knob and arrow keys.
Figure 5-5: Navigation control
User Interface